Recommend an ecu for AE111 Levin

[jdm86gtz]

I'm looking for an ecu for my AE111 Levin, I am thinking either a DIYautotune pnp or a Haltech sprint 500.
I'd prefer not to have to rewire the engine loom so I'd be looking to keep the distributor etc.
Engine specs are C/R bump through surfacing and TRD 0.8mm H/G, Toda 264 9mm cams and some bit of head work, Fujitsubo 4-2-1 manifold and TRD cat back and more than likely SamQ's new billet 50mm trumpets inside the OEM air chamber.

Can the Haltech be made into a PNP using ecu sockets or am I better just biting the bullet and doing a rewire?
Anybody using the DIYautotune on a blacktop?
The ecu tuner is happy with either option.

Thanks.

[totta crolla]

When I looked into the PnP DIY autotune ecu I discovered that the pinouts are for a US spec. car.

[jdm86gtz]

I have a blacktop so it's a 26,16,22 pin layout not the older type 10,18,14 like an AE86
This is the pnp option:
http://www.diyautotune.com/catalog/mega ... p-549.html

[ticotek]

Have you thought of using the AEM EMS-4? I have been thinking about it but don't know anyone running it on a 20v.

http://www.tweakdperformance.com/online ... ucts_id=33

[jdm86gtz]

Went with an DIYAutotune pnp for an SW20

[Metora06]

I just got everything to convert over to map set up on my blue top 16 valve I just need help with the wiring part can someone plz help me out I would really be greatful.... thnx