WTB want to buy 15" wheels $1500

[turbeau]

I am looking to buy some 15 or 16 inch wheels, 4x114.3 bolt pattern. Widths from 7.5 to 9 and 0 to -15 offset. no tires unless they are 225/50s
I am in San Diego.
$1,500 to $1,700 price range.

text me at 619-578-8583 if you are serious, Thanks guys

[turbeau]

Reedjayson I got your pm, Im new to this site and cannot send pm's back yet. Are the wheels you mentioned te37v's ? If so what color? That asking price is about $600 more than I posted and I would still have to pay for shipping. Thanks

[Reedjayson-ae86]

Yeah that's the price included shipping
What's your email
Ill send pictures to you

[hachi2k]

Any Interest??

viewtopic.php?f=20&t=2330

[turbeau]

Hachi2K, those are good looking wheels but I'm looking for something with an older vibe. Glws

[turbeau]

Still looking for wheels. Show me what you got

[bryan805]

Here you go, can be shipped or price adjusted if you want to drive down, or meet up.

viewtopic.php?f=20&t=3293

text 805-363-9575 if you're interested.

[bigan86]

Still looking for wheels. Show me what you got

i have a ssr formula mesh 15/7.5 offet -8 and 15/8 offset -14

[bigan86]

Still looking for wheels. Show me what you got

i have a ssr formula mesh 15/7.5 offet -8 and 15/8 offset -14

[2tone86]

Check out my SSR MK2, I can remove the tires if you dont want them.

15x8/9 +0

viewtopic.php?f=20&t=3496

[peterJDM]

I don't know if you are looking to buy anything a little cheaper or not but I have a set of Centerline Auto Drags 15x8.5 offset unknown but has 3 inch lips. The bolt pattern is 4x108 and you can either buy it with my 4x100+4x114.3 to 4x108 25mm adapters or I can get them re-drilled at a shop to 4x114.3 at your expense (if you are interested I can get a quote, last time I checked it was about $60 a wheel). There is slight damage on one rim but I was quoted at a wheel repair shop it's a $50-80 fix (the tiny holes on the lip of the rims are present on all 4 rims, and as far as I know are also present on all the Centerline Auto Drag wheels, and they are threaded so you can actually screw in bolts to prevent the rim from spinning loose from the tire since these were made for the drag strip). Tires are 195/45R15 Federal SS595 (has about 600 miles on them), but I can get those removed if you don't want them. We can discuss price depending on what you want.

Had an account here before the website went under construction. I don't check here often, if you are interested text me at (559) 287-3759

[turbeau]

thanks for the offer peterJDM. Centerlines are not the style im going for. GLWS

Im trying to to buy the Formula Mesh posted above, but still looking for some cool old school JDM wheels for my Z