My name is Louie and I just purchased a 1986 Corolla SR5 hatch with an 4AC engine but I cant get the damn thing to start. I got it with a Weber 32/36 carburetor which I recently got rebuilt. Installed a new throttle cable I ordered from RockAuto. Installed the carburetor accordingly and the car still wont start. I don't smell any fuel or anything so I suspect its a fuel pressure issue but Im trying to see if you guys could help me. I took a couple of pictures to show you guys the install and a pictures of a few connectors that I have no idea where they belong or connect to but I'm kinda suspecting might be the issue. Any help? Thanks! I would appreciate some pictures to compare mine with so I could have a better idea of where all those connectors go.
![Image](http://i52.photobucket.com/albums/g32/323MEMO1/Mobile%20Uploads/image_zpsmis1kzlz.jpg)
![Image](http://i52.photobucket.com/albums/g32/323MEMO1/Mobile%20Uploads/image_zpse8bc6yrj.jpg)
![Image](http://i52.photobucket.com/albums/g32/323MEMO1/Mobile%20Uploads/image_zpskclpdno0.jpg)
![Image](http://i52.photobucket.com/albums/g32/323MEMO1/Mobile%20Uploads/image_zpskplbqns7.jpg)
![Image](http://i52.photobucket.com/albums/g32/323MEMO1/Mobile%20Uploads/image_zpswe8q8k5k.jpg)
I checked all fuses under drivers side and fuse box in the engine bay everything looks fine there. Although I am missing a EFI fuel on the engine bay fuse box but I doubt that applies to my SR5 since its carburetor but please correct me if wrong. Also, I sprayed starting fluid directly into the carb and the engine turns on if I keep giving it starting fluid but as soon I I stop it shut down.