20 Valves of Goodness.
20 Valves of Goodness.
Okay so I've been using this site for awhile now for information and what not, I thought it's about time I make a build thread.
I've owned a couple of corollas with 16v's in them, this is my current ke70 corolla, I bought the car with a 16v in it but after countless issues I decided to finally go with a 20v. I've always wanted to pour a load of money into a High Comp 20v build and I have finally pulled my finger out and am getting it sorted.
So this is my build so far and whats to come.
4A-GE High Comp 20v Blacktop
CP 81.50mm bore high compression forged pistions C/R 12:5:1
Brian Crower H beam forged conrods
ARP head studs
Fidanza Adjustable Cam Gears
HKS timing belt
Kelford 194-C racing cams
Intake: 284' Duration 9.30mm Lift.
Exhaust: 278' Duration. 8.50mm Lift
Kelford Cams racing valve springs
Fully Reconditioned Block and Head
Port and Polish
New Water Pump
New Oil Pump. Ported and High Pressure Kit.
TRD 0.8mm multi layer metal head gasket
1zze Coilpacks
All SamQ Engineering RWD Conversion Parts.
Koyo 53mm core Aluminium Radiator
Custom Full 2.5' Stainless Steel exhaust system tucked up over the diff with High flow muffler and resonator.
Engine Management:
Haltech Platinum Sport 1000
Brakes:
Ae86 JDM Brake callipers
Goodridge braided brake lines.
Ae86 Slotted and vented Rotors.
Suspension:
30mm RCA's
New AJPS Tie Rods
Adjustable toe arms
New Bc Gold Hight and Damper Adjustable 8k Front Coilovers
New G4 8k Hight and Damper Adjustable Rear Coilovers
AE86 JDM Steering Rack
AE86 JDM Steering Arms
Lengthened and Boxed Xt130 Lca's (20mm)
I also have a wheel hoarding problem.
Hoshino G4 14x8 -7
SSR MK3's 14x8.5 -8
Equip 01's 14x8 -15
SSR Mk2 14x7
SSR Longchamps 14x6.5 +12
Rear Arches are front ke70 guards welded on the rear.
All rust just out and Fresh respray.
Nardi Steering wheel.
Velo Gp90 Fixed Back Bucket Seat.
Some of the goodies on the way.
T-series Diff with 4.77 Cw/p and Locker/lsd.
Either PowerCraft, Jasma or Custom 4-2-1 Headers Still unsure on which one to go with.
Defi Oil pressure, oil temp and water temp Gauges.
Another Gp90 and Harnesses
Just some photos of the car from when I got it to now. (I like taking lots of photos)
When I bought the engine.
And Finally where I'm at now. Painting Engine Bay and getting ready for motor to go in when It gets back.
I've owned a couple of corollas with 16v's in them, this is my current ke70 corolla, I bought the car with a 16v in it but after countless issues I decided to finally go with a 20v. I've always wanted to pour a load of money into a High Comp 20v build and I have finally pulled my finger out and am getting it sorted.
So this is my build so far and whats to come.
4A-GE High Comp 20v Blacktop
CP 81.50mm bore high compression forged pistions C/R 12:5:1
Brian Crower H beam forged conrods
ARP head studs
Fidanza Adjustable Cam Gears
HKS timing belt
Kelford 194-C racing cams
Intake: 284' Duration 9.30mm Lift.
Exhaust: 278' Duration. 8.50mm Lift
Kelford Cams racing valve springs
Fully Reconditioned Block and Head
Port and Polish
New Water Pump
New Oil Pump. Ported and High Pressure Kit.
TRD 0.8mm multi layer metal head gasket
1zze Coilpacks
All SamQ Engineering RWD Conversion Parts.
Koyo 53mm core Aluminium Radiator
Custom Full 2.5' Stainless Steel exhaust system tucked up over the diff with High flow muffler and resonator.
Engine Management:
Haltech Platinum Sport 1000
Brakes:
Ae86 JDM Brake callipers
Goodridge braided brake lines.
Ae86 Slotted and vented Rotors.
Suspension:
30mm RCA's
New AJPS Tie Rods
Adjustable toe arms
New Bc Gold Hight and Damper Adjustable 8k Front Coilovers
New G4 8k Hight and Damper Adjustable Rear Coilovers
AE86 JDM Steering Rack
AE86 JDM Steering Arms
Lengthened and Boxed Xt130 Lca's (20mm)
I also have a wheel hoarding problem.
Hoshino G4 14x8 -7
SSR MK3's 14x8.5 -8
Equip 01's 14x8 -15
SSR Mk2 14x7
SSR Longchamps 14x6.5 +12
Rear Arches are front ke70 guards welded on the rear.
All rust just out and Fresh respray.
Nardi Steering wheel.
Velo Gp90 Fixed Back Bucket Seat.
Some of the goodies on the way.
T-series Diff with 4.77 Cw/p and Locker/lsd.
Either PowerCraft, Jasma or Custom 4-2-1 Headers Still unsure on which one to go with.
Defi Oil pressure, oil temp and water temp Gauges.
Another Gp90 and Harnesses
Just some photos of the car from when I got it to now. (I like taking lots of photos)
When I bought the engine.
And Finally where I'm at now. Painting Engine Bay and getting ready for motor to go in when It gets back.
TailorMade☆DC
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto
- oldeskewltoy
- Club4AG MASTER
- Posts: 2185
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: 20 Valves of Goodness.
I'd love to see some views of the head before it gets re-assembled....
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Re: 20 Valves of Goodness.
Nice ride......keep the goodness coming
Re: 20 Valves of Goodness.
EXCELLENT! can you post a pic of the engine in the car...
Re: 20 Valves of Goodness.
I need to get my wheel collection up.
Re: 20 Valves of Goodness.
Visited my engine builder today, arrived to see this, new pistons/rods and head is all ported and cleaned, decided to go oversized vales and Toda oil pump gears, will have redline somewhere around the 9000-9500 range. Block is being honed at the moment and all should be going back together in the net few weeks, just waiting on head studs and adjustable pulleys.
Also got bored and decided to polish the wiper motor and heat tap and clean up the booster. Pretty stocked with how things are coming along.
Also got bored and decided to polish the wiper motor and heat tap and clean up the booster. Pretty stocked with how things are coming along.
TailorMade☆DC
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto
Re: 20 Valves of Goodness.
keep the goodness coming
-
- Posts: 1
- Joined: Fri Jun 20, 2014 11:12 pm
- Location: Denton, Texas
Re: 20 Valves of Goodness.
Very nicely done. Going to be awesome to see how this all works out in the end!
Musician- Avid Car enthusiast- Eventual Trueno Owner <3
(Fingers Crossed)
(Fingers Crossed)
Re: 20 Valves of Goodness.
So I’ve basically come to a stand still until I get my motor back which shouldn’t be to far away, then just need to find someone to tune/wire it up.
Messed around with my dash which I’m pretty happy with and slowly putting the car back together getting most things painted/cleaned before going back in.
Messed around with my dash which I’m pretty happy with and slowly putting the car back together getting most things painted/cleaned before going back in.
TailorMade☆DC
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto
-
- Club4AG Expert
- Posts: 224
- Joined: Sat Feb 15, 2014 7:34 am
Re: 20 Valves of Goodness.
I'd like to see a boso/kaido style racer, it'll probably require some fab work tho.
Re: 20 Valves of Goodness.
Very Nice build man. I love the Hoshinos. Perfect size
- RuizXIII
- Club4AG Enthusiast
- Posts: 165
- Joined: Wed Jan 16, 2013 7:33 pm
- Location: Smell Ya Later, NJ
Re: 20 Valves of Goodness.
Man, this looks great. Keep it up! 20V and KE...a beauty of a mix
irony.cc
Re: 20 Valves of Goodness.
What made you go with that particular EMS? I want to go that route with my 20v and add COPs but the quote I just got from a local shop was 3700 dollars which is more than i paid for the whole damn motor. I'm trying to do research on it so that i may take the install myself and just pay for tuning. Build looks great!
Re: 20 Valves of Goodness.
Little bit of an update, got my engine back the other week so decided to clean up my gearbox.
Before.
Gearbox, meet acid..
Came up awesome! Also got a new 5 Puk Sprung Exedy Cluch, ARP Flyweel bolts etc etc...
Got the motor all ready and in it went. Just taking my time polishing/painting everything before it goes in.
I'm in no rush to get it finished but kinda aims for March 2015.
Before.
Gearbox, meet acid..
Came up awesome! Also got a new 5 Puk Sprung Exedy Cluch, ARP Flyweel bolts etc etc...
Got the motor all ready and in it went. Just taking my time polishing/painting everything before it goes in.
I'm in no rush to get it finished but kinda aims for March 2015.
TailorMade☆DC
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto
- grappletech
- Club4AG Expert
- Posts: 344
- Joined: Sat Jan 12, 2013 12:13 pm
Re: 20 Valves of Goodness.
Question, what the heck is that acid????
87 GTS Coupe stock and Super Duper Clean
87 GTS Coupe Beams 3sge (under construction cuz I'm slow and lazy and broke-FML)
87 SR5 Coupe Shell. (Sold)
86 SR5 Hatch Shell
86 GT-SR5 Coupe 20v Swap
87 GTS Coupe Beams 3sge (under construction cuz I'm slow and lazy and broke-FML)
87 SR5 Coupe Shell. (Sold)
86 SR5 Hatch Shell
86 GT-SR5 Coupe 20v Swap
Re: 20 Valves of Goodness.
That tranny looks brand new! Holy ****!
- RuizXIII
- Club4AG Enthusiast
- Posts: 165
- Joined: Wed Jan 16, 2013 7:33 pm
- Location: Smell Ya Later, NJ
Re: 20 Valves of Goodness.
It looks like the 'mission is melting away in that pic with the acid. Neato, ha.
irony.cc
Re: 20 Valves of Goodness.
New Fenix Rad in and fitted ITB’s.
TailorMade☆DC
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto
- RuizXIII
- Club4AG Enthusiast
- Posts: 165
- Joined: Wed Jan 16, 2013 7:33 pm
- Location: Smell Ya Later, NJ
Re: 20 Valves of Goodness.
Engine is looking great, man.
What was the acid you used to clean the gear box?
What was the acid you used to clean the gear box?
irony.cc
- InitialB
- Club4AG Enthusiast
- Posts: 135
- Joined: Wed Feb 20, 2013 8:58 pm
- Location: Torrance, CA
- Contact:
Re: 20 Valves of Goodness.
I also want to know what that acid was. NEED DAT.
Re: 20 Valves of Goodness.
Not 100% sure on what acid it was, pretty sure it was just typical Hydrochloric Acid.
New cam cover. 2 Speed flow fittings for catch can and custom internal baffle.
New cam cover. 2 Speed flow fittings for catch can and custom internal baffle.
TailorMade☆DC
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto
Re: 20 Valves of Goodness.
Dope Build. Keep it up. Really like how clean this car is coming out. Great work man
Re: 20 Valves of Goodness.
Yeah trying to keep it as clean as possible, thanks dude
TailorMade☆DC
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto
Re: 20 Valves of Goodness.
Washed it for the first time in like a year and a half.
TailorMade☆DC
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto
- oldeskewltoy
- Club4AG MASTER
- Posts: 2185
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: 20 Valves of Goodness.
those headers don't look like they have been heated yet.... assume the start up has been delayed??
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Re: 20 Valves of Goodness.
oldeskewltoy wrote:those headers don't look like they have been heated yet.... assume the start up has been delayed??
Yeah still hasn't been started yet, been sorting out some personal stuff, getting a new tilt trailer made in the next 2 weeks then off for some fab work, bash plate, catch can etc etc. then off for tune wire up after that.
TailorMade☆DC
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto
20v 4AG Corolla:
http://club4ag.com/forums/viewtopic.php?f=7&t=11687
TailorMade Photography
https://www.facebook...TailorMadePhoto