"nostalgia"

User avatar
onelungderryl
Club4AG Regular
Posts: 35
Joined: Mon Jan 14, 2013 9:20 pm

Re: "nostalgia"

Postby onelungderryl » Thu Mar 20, 2014 2:29 am

Got my bumper in one piece. Need to smooth out and do a little bit more filling.
Image

Some transmission shots for you guys. Tight fit but has space for vibration.
Image

Image

Also working on modding the sakura fab transmission mount since it didn't line up with my setup :(

Image

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


User avatar
onelungderryl
Club4AG Regular
Posts: 35
Joined: Mon Jan 14, 2013 9:20 pm

Re: "nostalgia"

Postby onelungderryl » Thu Mar 20, 2014 2:30 am

Wes picked me up a tranny mount from an auto sr5. Sacrificed it to make a template to bring to Joey at Performance Options.

Image
Image
****CENSORED****picture_of_my_terrible_welds.jpg****CENSORED****

Pulled my dash to fix my heater core. Before
Image

Panky's in Hayward hooked it up. I brought it in and BS'd with them for a while and 5 minutes later it was done free of charge :)

After, reinforced now with new silicone hoses (not doing this ever again)
Image

Installed and didn't have to remove the engine 8-)
Image

Got around to drilling the hole for my bell housing. Bolted the bell housing to the plate, flipped it over, threw a 3/8" drill bit in the chuck.
Image
Image
Image
Image

Picked up my one piece. If anyone wants one PM me, I can get them done for any car (steel) for around $250 with your yokes/driveshaft pieces.
Image

Took out camber from the front to look more flush
Image

Rear pic just because
Image

Delays at the machine shop. Parts wont be done until next week, then I have to tap them myself for the 3/8's bolt so they are easy to remove/service the pilot bearing. GAHHH I just want to drive...
Image

yellowsnow4free
Club4AG Enthusiast
Posts: 186
Joined: Thu Jan 10, 2013 10:55 am

Re: "nostalgia"

Postby yellowsnow4free » Thu Mar 20, 2014 12:28 pm

onelungderryl wrote:
LongGrain wrote:And damn you for finding a supra axle. I need to go junk yarding when it gets warm again.
Also why not run a toaster toyota van axle?

Elaborate please! :D

Awesome build BTW; very impressed by the bodywork. Gives me inspiration for the inevitable bodywork I need to do on my car :P

Good luck with your build! Keep up the good work :)

joel23
Club4AG Regular
Posts: 36
Joined: Fri Jan 11, 2013 10:21 pm
Location: las vegas nv...

Re: "nostalgia"

Postby joel23 » Thu Mar 20, 2014 1:15 pm

its looks great............. :mrgreen:

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


JyuRoku
Club4AG Enthusiast
Posts: 120
Joined: Mon Jan 20, 2014 3:36 pm

Re: "nostalgia"

Postby JyuRoku » Thu Mar 20, 2014 4:16 pm

nice ride man! Really starting to want to remove my factory sideskirts. Looks good with bumper+lip with no skirts.

sekang0
Club4AG Expert
Posts: 202
Joined: Fri Jan 11, 2013 7:46 pm
Location: Stockton, CA

Re: "nostalgia"

Postby sekang0 » Sun Mar 23, 2014 4:45 am

Great update Derryl! So intense! !
'85 GT-S project since 2010
Image

User avatar
onelungderryl
Club4AG Regular
Posts: 35
Joined: Mon Jan 14, 2013 9:20 pm

Re: "nostalgia"

Postby onelungderryl » Mon Apr 07, 2014 1:17 am

This car is stupid. I hate it.

Image
Image

John H.
Club4AG Expert
Posts: 492
Joined: Thu Jan 17, 2013 9:40 am
Location: SoCal

Re: "nostalgia"

Postby John H. » Wed Apr 30, 2014 3:04 pm

onelungderryl wrote:Image

This thing looks MEAN!
On another note, I remember you used to have a DIY on the old Club4AG for a dash refurb.
You still rocking it? How's it holding up?

-John H.

marley4us
Club4AG Expert
Posts: 412
Joined: Fri Jan 11, 2013 10:40 pm
Location: milpitas

Re: "nostalgia"

Postby marley4us » Wed Apr 30, 2014 6:11 pm

That looks so good! Did you do all of that in your garage? that was very professionally done I am impressed!
1985 Corolla Hatch widebody w/ SR20det (The Project)
1993 5SGTE stroker widebody MR2 Turbo (drag car)
2002 Miata SE hardtop (daily Driver)
1994 4runner (The truck)

Clouds
Club4AG Expert
Posts: 415
Joined: Thu Oct 31, 2013 6:03 am
Location: Georgia

Re: "nostalgia"

Postby Clouds » Wed Apr 30, 2014 6:34 pm

marley4us wrote:That looks so good! Did you do all of that in your garage? that was very professionally done I am impressed!

+1
There shouldn't be a day that goes by where you don't learn something new.

LongGrain
Moderator
Posts: 449
Joined: Fri Jan 11, 2013 10:38 pm

Re: "nostalgia"

Postby LongGrain » Mon May 05, 2014 7:58 pm

My favorite US corolla.

John H.
Club4AG Expert
Posts: 492
Joined: Thu Jan 17, 2013 9:40 am
Location: SoCal

Re: "nostalgia"

Postby John H. » Mon May 05, 2014 9:37 pm

LongGrain wrote:My favorite US corolla.

+1

Bk65
Posts: 7
Joined: Tue Jun 17, 2014 8:36 am

Re: "nostalgia"

Postby Bk65 » Wed Jun 18, 2014 8:39 am

My goodness she's purty.

User avatar
idreamofdrifting
Club4AG MASTER
Posts: 1123
Joined: Fri Jan 11, 2013 2:35 pm

Re: "nostalgia"

Postby idreamofdrifting » Wed Jun 18, 2014 9:37 am

onelungderryl wrote:First off I apologize for the lack of detail. My old thread went down with the site and I'm too lazy to salvage it. So here's some pictures with a little bit of detail.

August 1st, 2008 I picked up my 1985 Toyota Corolla GT-S off the original owner for $1150. I found it on craigslist listed as a "TOYOTA CARROLA"

Image
Image
Image
Image
Image
Image
Image
Image
Image



^ This......when the AE86 looked the best IMO. It's just the "nostalgic" side of me.

Still, keep up the great work of keeping her sound! Viva RED ROLLAS!
Image

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “OWNERS and BUILDERS”

Who is online

Users browsing this forum: No registered users and 2 guests