20V BT OEM flywheel question

s3cf
Club4AG Expert
Posts: 343
Joined: Mon Jan 14, 2013 9:40 pm

20V BT OEM flywheel question

Postby s3cf » Thu Aug 15, 2019 11:25 am

Hello

To install 20V BT OEM flywheel into an AE86, all I need is the clutch pressure plate and disc from an AE92 GTS, correct?

Thanks

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


User avatar
jondee86
Moderator
Posts: 2420
Joined: Fri Jan 11, 2013 10:21 pm
Location: Wellington, New Zealand

Re: 20V BT OEM flywheel question

Postby jondee86 » Thu Aug 15, 2019 9:26 pm

Correct. Should be 210-212mm outside diameter clutch disc. Use the
AE86 throwout bearing and spigot bearing (if you have a 20V engine).

Cheers... jondee86
The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.

s3cf
Club4AG Expert
Posts: 343
Joined: Mon Jan 14, 2013 9:40 pm

Re: 20V BT OEM flywheel question

Postby s3cf » Fri Aug 16, 2019 11:12 am

^^^ thanks Jondee86

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “TECH: Corolla AE86”

Who is online

Users browsing this forum: No registered users and 3 guests