Fender stretch, shop or DIY
- hachi-6 D0ri
- Club4AG Enthusiast
- Posts: 116
- Joined: Fri Jan 11, 2013 10:06 pm
- Location: Huntington Beach
Fender stretch, shop or DIY
I was wondering if any one had an instructional on how to roll and stretch the factory fenders on an 86. Or if anyone knows of a shop in OC Cali area that does this. Thanks
If your not crashing .. Stop being a p**$y Go hard in the paint!
~Stig
~Stig
-
- Club4AG Enthusiast
- Posts: 101
- Joined: Thu Jan 10, 2013 10:08 pm
Re: Fender stretch, shop or DIY
^^^ that will not achieve the end result that most people with ae86 are after. If OP wants the classic "bubble" flare that most people do, it takes quite a bit of hammering and shaping the metal on both the inside and outside, then a thin layer of filler to smooth out the ripples and, finally, repaint.
A fender roller isnt going to do this.
A fender roller isnt going to do this.
- hachi-6 D0ri
- Club4AG Enthusiast
- Posts: 116
- Joined: Fri Jan 11, 2013 10:06 pm
- Location: Huntington Beach
Re: Fender stretch, shop or DIY
LongGrain wrote:^^^ that will not achieve the end result that most people with ae86 are after. If OP wants the classic "bubble" flare that most people do, it takes quite a bit of hammering and shaping the metal on both the inside and outside, then a thin layer of filler to smooth out the ripples and, finally, repaint.
A fender roller isnt going to do this.
yes ! yes! thats what im looking for . how did you do that or who did that
If your not crashing .. Stop being a p**$y Go hard in the paint!
~Stig
~Stig
-
- Club4AG Enthusiast
- Posts: 101
- Joined: Thu Jan 10, 2013 10:08 pm
Re: Fender stretch, shop or DIY
Why pay its not brain surgery
It should a day no more or less
Waste of money to pay anybody to do it
Just take u4 time
It should a day no more or less
Waste of money to pay anybody to do it
Just take u4 time
- hachi-6 D0ri
- Club4AG Enthusiast
- Posts: 116
- Joined: Fri Jan 11, 2013 10:06 pm
- Location: Huntington Beach
Re: Fender stretch, shop or DIY
mideng wrote:Why pay its not brain surgery
It should a day no more or less
Waste of money to pay anybody to do it
Just take u4 time
I would not pay. I am just looking for a good step by step
If your not crashing .. Stop being a p**$y Go hard in the paint!
~Stig
~Stig
Re: Fender stretch, shop or DIY
Go to ur local Autobody shop and ask... It's not brain surgery
-
- Club4AG Regular
- Posts: 31
- Joined: Fri Sep 11, 2015 11:18 am
Re: Fender stretch, shop or DIY
mideng wrote:Go to ur local Autobody shop and ask... It's not brain surgery
yeaokbrowhateveryousay. 1 day no more no less huh?
Re: Fender stretch, shop or DIY
Damn, you guys are brave... I would rather pay instead of messing it up big time.