4age 20v & 7afe HG comparison

User avatar
morgan
Club4AG Pro
Posts: 917
Joined: Thu Jan 10, 2013 10:29 pm
Location: og, nj

4age 20v & 7afe HG comparison

Postby morgan » Fri Jan 23, 2015 11:46 am

there's been a bunch of people saying that they run the 7afe Head Gasket on the 20v's with no problems for some time now. the 7afe HG is 0.7mm thick, multi layer steel. just a hair under the TRD 20v multi-layer steel HG @ 0.8mm. so I spent some time researching with no definitive answers, just "yeah it works", and with the 20vs known to have higher temps near the #4 cylinder when running RWD coolant flow in an ae86, I wanted to be sure. so here's what I have so far...feel free to add, disagree, converse.
-----------------------------------------
4age 20v block
Image
-----------------------------------------
7afe block
Image
-----------------------------------------
4age 20v head
Image
-----------------------------------------
7afe head
Image
-----------------------------------------
4age 20v to 7afe block comparison
Image
-----------------------------------------
4age 20v to 7afe head comparison
Image
-----------------------------------------
4age 20v to 7afe HG comparison
Image
-----------------------------------------
missing ports on 7afe HG
Image
-----------------------------------------
so I think it would work as is, BUT regarding the coolant temps at the rear of the head, I'm thinking about punching holes to match the 20v HG(with a legit punch, not going to drill or anything), since I have a 7afe HG sitting at home and I'm pulling my 20v apart for a few things this winter. they only cost about $20 on average, which is way cheaper than the $80+ for the TRD. even if you have to buy the punch, that's another $20 and it can be used for a bunch of other things.
(all pics found using google)
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up

User avatar
Rogue-AE95
Club4AG Expert
Posts: 493
Joined: Thu Jan 10, 2013 4:03 pm
Location: Tampa Bay, FL

Re: 4age 20v & 7afe HG comparison

Postby Rogue-AE95 » Fri Jan 23, 2015 2:45 pm

Great info, thanks for posting this. I am curious about the differences with the 16v head & head gasket, but I can always pull up an image and compare it to those.
'88 Corolla All-Trac x2 (manual, auto)

User avatar
morgan
Club4AG Pro
Posts: 917
Joined: Thu Jan 10, 2013 10:29 pm
Location: og, nj

Re: 4age 20v & 7afe HG comparison

Postby morgan » Fri Jan 23, 2015 3:52 pm

Im hoping to get to that next week, 16v 4age vs. 7afe
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up