agze oil sump replacement

[xarion]

HI Guys

I am going to be replacing my oil sump. How do you remove all oil residue from the block and gasket so that the sealant can stick ?

Thanks!

Xarion

[jondee86]

A can of spray-on engine degreaser ?

Cheers... jondee86

[MisterJerk]

there isn't a paper gasket between the oil pan and block. fipg from the factory.
hopefully you have the engine out. I used half a roll of paper towels and some carb cleaner.

[xarion]

Thanks, thought that degreaser might still leave a little bit behind, thanks =)

[s24a]

If you are worried about degreaser residue, then go over the sealing areas with a cloth soaked in Brake Cleaner (or use Acetone).
This will clean and dry the surfaces for the FIPG material.

[xarion]

Thanks for the advice, will give that a try!