carbon fiber gauge panel / door panels
carbon fiber gauge panel / door panels
NO LONGER FOR SALE
Last edited by vuh on Tue May 19, 2015 1:50 pm, edited 3 times in total.
-
- Club4AG Expert
- Posts: 316
- Joined: Thu Jan 10, 2013 11:05 am
- Location: orange county - irvine
- Contact:
Re: carbon fiber gauge panel
OMG this is PERFECT!!! - its been a REALLy long time since someone offered these plates..
if people are running after market gauges, mite as well use this and ditch the old rott gauge cluster.
do these fit inside the stock housing? and clip in perfectly? it looks like its shaped perfectly for it to just snap in.. all the user needs is to just cut out the shape of their gauges / cluster. Can still retain the stock housing..
is that also DRY carbon!?
NOT BAD~!
if people are running after market gauges, mite as well use this and ditch the old rott gauge cluster.
do these fit inside the stock housing? and clip in perfectly? it looks like its shaped perfectly for it to just snap in.. all the user needs is to just cut out the shape of their gauges / cluster. Can still retain the stock housing..
is that also DRY carbon!?
NOT BAD~!
Rays - Project Mu - TE37 club
BLUE MOON / CUSCO
AE86fightclub.com
PM me for Contact
BLUE MOON / CUSCO
AE86fightclub.com
PM me for Contact
Re: carbon fiber gauge panel
I'm in for one. Text me 423-838-0102 and remind me on Friday (payday) cuz I'll totally forget lol.
Eric'sFreeAE86 from the old site
Knockoff Crew member #0001
Knockoff Crew member #0001
-
- Club4AG Expert
- Posts: 243
- Joined: Fri Jan 11, 2013 12:46 pm
- Location: G-town
Re: carbon fiber gauge panel
I'm down for one as well. Where are you located .
-
- Club4AG Expert
- Posts: 316
- Joined: Thu Jan 10, 2013 11:05 am
- Location: orange county - irvine
- Contact:
Re: carbon fiber gauge panel
I'm in!
Rays - Project Mu - TE37 club
BLUE MOON / CUSCO
AE86fightclub.com
PM me for Contact
BLUE MOON / CUSCO
AE86fightclub.com
PM me for Contact
Re: carbon fiber gauge panel
ronny -
yes, these fit inside the stock housing and snaps right in. these panels are hand layed and then compressed. the panels offered are in a semi gloss finish - the panel pictured with the defi gauges is a matte finish, i can have these panels available in a matte finish for an extra charge.
carbd7age -
sounds good.
eightysixer23 -
im located in orange county, ca - im usually in the anaheim, orange and tustin area.
yes, these fit inside the stock housing and snaps right in. these panels are hand layed and then compressed. the panels offered are in a semi gloss finish - the panel pictured with the defi gauges is a matte finish, i can have these panels available in a matte finish for an extra charge.
carbd7age -
sounds good.
eightysixer23 -
im located in orange county, ca - im usually in the anaheim, orange and tustin area.
Last edited by vuh on Fri Sep 13, 2013 11:38 pm, edited 1 time in total.
-
- Club4AG Enthusiast
- Posts: 141
- Joined: Thu Jan 10, 2013 10:37 pm
Re: carbon fiber gauge panel
interested in these...still available?
Re: carbon fiber gauge panel
i have a couple available
Last edited by vuh on Fri Sep 13, 2013 11:39 pm, edited 1 time in total.
Re: carbon fiber gauge panel
How much extra for the matte finish? Any wait time?
Re: carbon fiber gauge panel
i can have the panel available in a matte finish for 90 picked up or 95 shipped, no wait time.
Re: carbon fiber gauge panel
Still have any left? Im in as well
Re: carbon fiber gauge panel
do you have anymore??? i want one!
Re: carbon fiber gauge panel
yes, i still have a couple available.
-
- Club4AG Expert
- Posts: 316
- Joined: Thu Jan 10, 2013 11:05 am
- Location: orange county - irvine
- Contact:
Re: carbon fiber gauge panel
Got mine **** is sick!!!
Rays - Project Mu - TE37 club
BLUE MOON / CUSCO
AE86fightclub.com
PM me for Contact
BLUE MOON / CUSCO
AE86fightclub.com
PM me for Contact
Re: carbon fiber gauge panel
Just got mine and already test fitted. Fitment is perfect and snug. Very sturdy as well.
Re: carbon fiber gauge panel
what was used to cut the holes out so that this plate doenst crack when we decided to cut the holes out for our needs
vuh wrote:hi guys,
i just wanted to give you all a brief introduction... i work for a carbon fiber composite manufacturing company producing parts for lamborghini, ferrari, audi, porsche, etc. my good friend introduced me to the corolla and ive been slowly building my project car. as i build my corolla and make parts for the car i will introduce them to the corolla community so that there are more parts / options for you guys. we use high quality raw materials (carbon, gel coat, resin, epoxy, etc.) and everything is made in-house in orange county, ca. i am only doing this afterhours on my free time.
for those running aftermarket gauges / cluster (defi, trd, stack, aim, s2000, etc.) ive made a blank 2x2 twill carbon fiber panel so that you can cut out whatever shape you need to accommodate your aftermarket setup.
im offering these for $85 shipped or $80 picked up.
set up with defi gauges
please pm me if youre interested. thank you!
-vu
Re: carbon fiber gauge panel
Picked up mine last night. Looks good! I can't wait till the rest of my gauges are here.
Re: carbon fiber gauge panel
ae86luis wrote:what was used to cut the holes out so that this plate doenst crack when we decided to cut the holes out for our needs
The seller recommend using a hole saw/drill for circular holes, and a drill, jig saw, dremel, etc. for other shapes. Sand edges after cutting/drilling. Obviously use common sense when cutting/drilling to not damage the panel.
So far I've done a rectangular cutout for the stock fuel gauge using a dremel with standard small cutoff wheels (I broke a few in the process). It cut through the panel like butter, but a lot of patience and a steady hand is needed since it's all done by hand.
Re: carbon fiber gauge panel
i still have a couple of these gauge panels left for those interested.
Re: carbon fiber gauge panel
updated, items shipped. pm's replied - i have 3 left if anyone else is interested.
Re: carbon fiber gauge panel / door panels
updated - door panels.
Re: carbon fiber gauge panel / door panels
Interested in carbon fiber rear panels in 1k weave please!
"TOYOTA, Let's Go Drifting!
Re: carbon fiber gauge panel / door panels
Sent you a pm
Re: carbon fiber gauge panel / door panels
pm's replied. thank you!
-
- Club4AG Enthusiast
- Posts: 141
- Joined: Thu Jan 10, 2013 10:37 pm
Re: carbon fiber gauge panel / door panels
Hmmmm i really like this will pm you tomorrow!!!! Funds ready
- original menace
- Club4AG Enthusiast
- Posts: 88
- Joined: Mon Jan 14, 2013 9:20 pm
Re: carbon fiber gauge panel / door panels
Are you shipping these internationally? I'm willing to pay for shipping