Here's my situation. Let me first start it off with a picture
So here are the front coils for a ae86.
I took apart the old "stock" struts taken off the rotors and I was putting the break shield on. Then I notice the holes did not line up. So I thought maybe Its the wrong side so I took the other one apart and I was the same.
The holes for the shield on the strut is shorter than the original. And only one of the bolts on the right would bolt up.
My question is. Did I get the wrong spindle on my megan or is my "stock" suspension weren't really stock? thank you.
Club I need help ASAP!
Re: Club I need help ASAP!
You either have the wrong spindle/strut setup or you making a simple orientation mistake(most likely this one).
Make sure you have the correct spindle on the correct side of the car and for reference the calipers on the front spindles mount on the side closest to the front bumper. By looking at this picture:
http://imageshack.us/photo/my-images/21 ... 4.jpg/sr=1
It seems the bolt patter is pretty close, if not the same, as to what you have in your picture. In the picture the left assembly is the passenger side, and the right one is the driver side. Your calipers bracket/calipers will mount where the dust shield is open.
Im sure you just need to look at it again. Hope this helps
Vic
Make sure you have the correct spindle on the correct side of the car and for reference the calipers on the front spindles mount on the side closest to the front bumper. By looking at this picture:
http://imageshack.us/photo/my-images/21 ... 4.jpg/sr=1
It seems the bolt patter is pretty close, if not the same, as to what you have in your picture. In the picture the left assembly is the passenger side, and the right one is the driver side. Your calipers bracket/calipers will mount where the dust shield is open.
Im sure you just need to look at it again. Hope this helps
Vic
Re: Club I need help ASAP!
I believe I got the wrong spindles then. The measurements from my original then to the Megan's are completely off
-
- Club4AG Expert
- Posts: 406
- Joined: Mon Jan 21, 2013 5:02 pm
- Location: 50th Northrop-Skylab-Lockheed MD/B 6891
- Contact:
Re: Club I need help ASAP!
Zenki85 wrote:I believe I got the wrong spindles then. The measurements from my original then to the Megan's are completely off
zenki85..I'd put in a call tomarrow to the supplier to get answers. Somethings not right!
________________________________________________________________________________
Speed doesn't kill, its the sudden stop.
Toy House Automotive & Engineering
87 GTS Coupe
85 Toyota Truck V-8 Matching Trailer
72 Blown 6-71 Pro Street Vega
Speed doesn't kill, its the sudden stop.
Toy House Automotive & Engineering
87 GTS Coupe
85 Toyota Truck V-8 Matching Trailer
72 Blown 6-71 Pro Street Vega
Re: Club I need help ASAP!
My stock
Re: Club I need help ASAP!
KonaTrueno723 wrote:Zenki85 wrote:I believe I got the wrong spindles then. The measurements from my original then to the Megan's are completely off
zenki85..I'd put in a call tomarrow to the supplier to get answers. Somethings not right!
Yes. Thank you. Here are pictures above
-
- Club4AG Expert
- Posts: 406
- Joined: Mon Jan 21, 2013 5:02 pm
- Location: 50th Northrop-Skylab-Lockheed MD/B 6891
- Contact:
Re: Club I need help ASAP!
Oh yeah..huge difference. The Megan's sure looks similar to the Cressida flange..I may be wrong
________________________________________________________________________________
Speed doesn't kill, its the sudden stop.
Toy House Automotive & Engineering
87 GTS Coupe
85 Toyota Truck V-8 Matching Trailer
72 Blown 6-71 Pro Street Vega
Speed doesn't kill, its the sudden stop.
Toy House Automotive & Engineering
87 GTS Coupe
85 Toyota Truck V-8 Matching Trailer
72 Blown 6-71 Pro Street Vega
-
- Club4AG Enthusiast
- Posts: 138
- Joined: Thu Jan 10, 2013 10:07 pm
Re: Club I need help ASAP!
You didn't have stock struts.
Here's a pic of Greddy's.
Andrew
Here's a pic of Greddy's.
Andrew