***Skizzup's Money Pit pt. 2***
Re: ***Skizzup's Money Pit pt. 2***
man thats freaking beautiful! hey are those origin rear flares? mind telling me your offset of your rims
I have a pair of CF origin coming in, but i may need to pull the sheet metal too to get em to fit right. my rims are 15x10-38et. Do you mind sharring your rims size and offeset?
I have a pair of CF origin coming in, but i may need to pull the sheet metal too to get em to fit right. my rims are 15x10-38et. Do you mind sharring your rims size and offeset?
1985 Corolla Hatch widebody w/ SR20det (The Project)
1993 5SGTE stroker widebody MR2 Turbo (drag car)
2002 Miata SE hardtop (daily Driver)
1994 4runner (The truck)
1993 5SGTE stroker widebody MR2 Turbo (drag car)
2002 Miata SE hardtop (daily Driver)
1994 4runner (The truck)
Re: ***Skizzup's Money Pit pt. 2***
Oh man I love GT Wings on coupes. Makes me think of those N2 Coupes out on Tsukuba Circuit <3
Plan on installing that diffuser soon? If so upload pics!!!
Plan on installing that diffuser soon? If so upload pics!!!
ANYONE CAN BUY A NEW CAR. IT TAKES A TRUE ENTHUSIAST
TO BREATHE LIFE INTO AN OLDER ONE.
Re: ***Skizzup's Money Pit pt. 2***
my rear flares are origin/runfree replica
the wheels pictured are work equip 01 in 15x9 -25 with a 205/50/15
i can also fit my work meister in 15x10 -15 with a 205/50/15
15x10 -38 is gonna be a hard fit unless your car is pretty high off the ground. thats more of a cby sizing
im going to try to get more pics of the wing soon. havent had time to make the brackets for the diffuser just yet. lol ill get around to it.
the wheels pictured are work equip 01 in 15x9 -25 with a 205/50/15
i can also fit my work meister in 15x10 -15 with a 205/50/15
15x10 -38 is gonna be a hard fit unless your car is pretty high off the ground. thats more of a cby sizing
im going to try to get more pics of the wing soon. havent had time to make the brackets for the diffuser just yet. lol ill get around to it.
Re: ***Skizzup's Money Pit pt. 2***
took the car out to autox couple of days ago. i need new front tires badly. lol going to try out the federal RSR. they've been getting a lot of good reviews.
lost an exhaust donut somewhere on the way there too lol, gotta address that too.
my tires are still hitting my inner fenders at full lock, so i guess its time to hammer more as well.
all these small kinks to work out, but no time haha
lost an exhaust donut somewhere on the way there too lol, gotta address that too.
my tires are still hitting my inner fenders at full lock, so i guess its time to hammer more as well.
all these small kinks to work out, but no time haha
Re: ***Skizzup's Money Pit pt. 2***
Day time pics!!! Wants to see GT Wing ^_^
edit: I now follow you on Instagram, @DriveFree
edit: I now follow you on Instagram, @DriveFree
ANYONE CAN BUY A NEW CAR. IT TAKES A TRUE ENTHUSIAST
TO BREATHE LIFE INTO AN OLDER ONE.
-
- Posts: 4
- Joined: Mon Jun 03, 2013 5:46 pm
Re: ***Skizzup's Money Pit pt. 2***
oh thanks slidesexy.
my work schedule is brutal the next few months. haha ill get pics of the wing and fix up little issues when i can. hopefully get some teaser pics at least next week when im back in town.
thanks for the comments guys
my work schedule is brutal the next few months. haha ill get pics of the wing and fix up little issues when i can. hopefully get some teaser pics at least next week when im back in town.
thanks for the comments guys
-
- Club4AG Expert
- Posts: 423
- Joined: Thu Jan 10, 2013 10:08 pm
- Location: SF
Re: ***Skizzup's Money Pit pt. 2***
Very cool car, nice work.
Re: ***Skizzup's Money Pit pt. 2***
looks like a very fun ride!
Re: ***Skizzup's Money Pit pt. 2***
some pics a friend of mine took... first "Real" daytime pics of the wing, with my meisters all around.
picking up a roll bar later this month. i dont know what color to paint it yet.
changing up my gauge set up. going with either defi CR or defi C2. i was originally planning to go with greddy multi da, but i've read some reviews online, and there are some isolated "lemon" units. i dont wanna risk getting one of them.
cluster is going to be all custom, with boost, tach and speedo utilizing the stock location with custom panel, and 3 60mm gauges in my hvac area along with my bee*r rev limiter, switches and defi controller. should be pretty clean after all is said and done.
picking up a roll bar later this month. i dont know what color to paint it yet.
changing up my gauge set up. going with either defi CR or defi C2. i was originally planning to go with greddy multi da, but i've read some reviews online, and there are some isolated "lemon" units. i dont wanna risk getting one of them.
cluster is going to be all custom, with boost, tach and speedo utilizing the stock location with custom panel, and 3 60mm gauges in my hvac area along with my bee*r rev limiter, switches and defi controller. should be pretty clean after all is said and done.
Re: ***Skizzup's Money Pit pt. 2***
thats a good looking coupe.........
-
- Club4AG Expert
- Posts: 316
- Joined: Thu Jan 10, 2013 11:05 am
- Location: orange county - irvine
- Contact:
Re: ***Skizzup's Money Pit pt. 2***
car looks like it going to n1.5 race.
just needs fatter tire =D
just needs fatter tire =D
Rays - Project Mu - TE37 club
BLUE MOON / CUSCO
AE86fightclub.com
PM me for Contact
BLUE MOON / CUSCO
AE86fightclub.com
PM me for Contact
Re: ***Skizzup's Money Pit pt. 2***
I know! I'm going to order some less aggressive wheels so i can run a 205/50/15 front and 225/50 (maybe45)/15 rear. I wanna try to grip race again haha
- juggernaut808
- Club4AG Enthusiast
- Posts: 88
- Joined: Thu Jan 10, 2013 10:39 am
- Location: Hawaii/Southern California
Re: ***Skizzup's Money Pit pt. 2***
Do you have any more pics of the engine setup?
Re: ***Skizzup's Money Pit pt. 2***
thanks guys
@juggernaut808 my friend has most of them (i actually only have pics of my car that people put on fb. lol) ill ask him to send me a few.
@juggernaut808 my friend has most of them (i actually only have pics of my car that people put on fb. lol) ill ask him to send me a few.
Re: ***Skizzup's Money Pit pt. 2***
my car started as a grip car when i first got it back in 2003. competed full seasons in San Francisco Region SCCA. had 13's, v710's and all. also did a couple track days at button willow. when 2006 hit i was all about the drift. haha
now i wanna get back into grip as i feel my grip skills have diminished since i was last competitively raced for times.
this pic was around early 2005 i believe. i could be (and most likely am) wrong. lol
now i wanna get back into grip as i feel my grip skills have diminished since i was last competitively raced for times.
this pic was around early 2005 i believe. i could be (and most likely am) wrong. lol
Re: ***Skizzup's Money Pit pt. 2***
my car has been dormant for about 2 months since i've been away from home quite a bit. only solution for that is to buy parts. HAHA
redoing my gauge set up, so i ordered some defi advance cr.
also a speedhut tach and GPS speedo. this pic was just taken from online. i havent received mine yet, as they are 100% custom and built to order. i ordered a color scheme to match the defi cr.
also got a carbon fiber gauge panel from vuh on here.
here's the link to his thread. its a super nice piece, all pre-drilled and ready to go. just throw it in your cluster and youre ready to go.
viewtopic.php?f=22&t=5741
waiting on a pair of equip 01's for the front of my car. should be here in a week or so. hehe so meisters or equips. hard choice to make. lol
also been spending some money on my daily, which is a kouki ls400 (ucf20) but no progress pics yet. mainly because my coils are on back order for a few more weeks, but here's something that should be pretty cool for them.
19 inch advan model 5 in custom white.
not much of an update. lol
but here's a cool shot my friend took while it all stood in the rain while he did his thing.
redoing my gauge set up, so i ordered some defi advance cr.
also a speedhut tach and GPS speedo. this pic was just taken from online. i havent received mine yet, as they are 100% custom and built to order. i ordered a color scheme to match the defi cr.
also got a carbon fiber gauge panel from vuh on here.
here's the link to his thread. its a super nice piece, all pre-drilled and ready to go. just throw it in your cluster and youre ready to go.
viewtopic.php?f=22&t=5741
waiting on a pair of equip 01's for the front of my car. should be here in a week or so. hehe so meisters or equips. hard choice to make. lol
also been spending some money on my daily, which is a kouki ls400 (ucf20) but no progress pics yet. mainly because my coils are on back order for a few more weeks, but here's something that should be pretty cool for them.
19 inch advan model 5 in custom white.
not much of an update. lol
but here's a cool shot my friend took while it all stood in the rain while he did his thing.