2010 marked a new era in my cars lifetime.
PAINT!



the one and only wes ong lol

fatlace klassik


dat ass

new seat finally, bride zeta iii type L

not only did i get paint and a seat, but i also go a few of new parts
origin fenders
runfree front bumper
cby sides
car went down again in march 2012 for an engine swap.
her last sanctioned event with a 4ag...

s14 sr20det mangggg

while the swap was happening, i picked up a new daily. kouki ls400 ucf20

fast forward a few months and magically the sr is in and running lol

also runfree flares were added.
now she sits like this.



waiting on my other pair of work meisters to get completed so i can put them on the rear.
current mod list as of 2/5/13
suspension:
front:
Tokico hts shocks
ground control coilover sleeve with eibach springs
cusco height adjustable camber plates
battle version lower control arms
battle version tension rods
t3 RCA
cusco sway bar
manual rack w/ t3 adaptor
ueo style inner tie rods
t3 outer tie rods
t3 steering knuckles
cusco strut bar
rear:
tokico hts shocks
trd springs (cut 1 coil)
cusco sway bar
cusco rear strut bar
cusco lateral rod
engine/drivetrain:
s14 sr20 det.
garret t28 ball bearing turbo
hks waste gate actuator
greddy rocker arm stoppers
greddy oil pan
front mount intercooler
custom top mount turbo manifold
oil filter relocation kit
Sard blow off valve
full custom 3 inch downpipe, exhaust with invidia muffler and URAS dolphin tail tip
OS Giken Hyper single clutch
trd 2 way lsd
custom driveshaft
interior/electronics:
bride zeta iii type L seat with Bride FG rails
Defi bf goost, egt, and fuel pressure gauges
powered by max EVDM (water temp and oil press)
Apex'i Safc
custom HVAC panel for gauges
Bee*r Rev Limiter
Personal fittipaldi dished 350 wheel (prefer this wayyyy over my 330mm orido style)
exterior:
Runfree front bumper (shine auto)
Cby side skirts
jdm kouki rear bumper w/ jblood add ons
runfree style flares
custom LED hello kitty tail lights by solo8 performance
blue neon underglow (YES, YOU READ THAT RIGHT)
wheels:
front: 15x8.5 -15 work meister s1 w/ 195/50/15 bridgestone re-11
rear: 15x10 -15 work meister s1 w/ 205/50/15 kumho XS (not to be confused with ast, xs is a grippy tire!)
15x9 -25 work equip 01 w/ 205/50/15 dunlop star spec z1
probably forgetting a lot of things....
next things up are
Voltex type 5 v-mount GT wing (already have, just need to mount it)
Re-Amemiya FD3s rear diffuser (already have, just need to mount it)
and in the future
Hydro e-brake
cage
passenger seat
new teamtech harnesses
speedhut custom green gauges in a custom cluster
another pair of equip 01 for the front
more of my car can be seen in these videos
fatlace word up 11/10/10 (im at 3:05) 4ag power still!
http://vimeo.com/17060226initial D reunion meet (lol yes, seriously)
http://vimeo.com/58333594