NonStopTuning Aluminum Alternator Brackets
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
For those who have inquired recently... YES! These little brackets are in stock and ready to rock
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
These little things have been popular lately. I love how people come up at events and say, "this is one of those little must haves for those of us who want to keep the 4AG alive and going in the 86."
We have a handful in stock and ready to rock, for anyone who may need one.
We have a handful in stock and ready to rock, for anyone who may need one.
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
In stock for the holidays!
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
I suppose it could, but why not use it the way everyone else seems to be doing? Our design allows customers to ditch the old OEM bracket... many of which have/will crack over time and become useless anyway. Either way, I think it would work.
Best of luck!
Re: NonStopTuning Aluminum Alternator Brackets
I only want one for ease of use in regard to belt tension (one person using a pry bar on oem setup is ridiculous, plus intake has to come off...)
In my mind the oem steel bracket should be stronger than an aluminum turnbuckle with small fasteners (heims), althouth I doubt it really matters either way.
If the product can be used both ways it may broaden the appeal. Any chance you could test it out?
In my mind the oem steel bracket should be stronger than an aluminum turnbuckle with small fasteners (heims), althouth I doubt it really matters either way.
If the product can be used both ways it may broaden the appeal. Any chance you could test it out?
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
I understand your reasoning, but the NST bracket has proven to be strong and durable for long term use. In fact, most people buy the NST bracket after their OEM piece has cracked or broken, and wish they had purchased the NST piece sooner. We've been offering this piece since 2010 and our customers seem to be very happy with them. We've never seen any reports of failure with the NST alternator bracket.
Thanks again, best of luck with all your projects
Thanks again, best of luck with all your projects
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
Thank you all for the continued support
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
Happy New Year Everyone!!!
Thank you all for the continued help and support!
Thank you all for the continued help and support!
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
These little things have been very popular items in our catalog recently! Anyone have photos to share of your setups? We'd love to see your engines!
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
Any of our recent customers have any new install photos and/or reviews to share?
-
- Club4AG Pro
- Posts: 644
- Joined: Thu Oct 06, 2016 2:23 pm
- Location: Middle of Hell, Florida
Re: NonStopTuning Aluminum Alternator Brackets
Would you guys be interested in making lightweight Idler pulley brackets?
Success guardian... Successsssssss..
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
CloudStrife wrote:Would you guys be interested in making lightweight Idler pulley brackets?
Possibly, depending on demand and support from the community.
-
- Club4AG Pro
- Posts: 644
- Joined: Thu Oct 06, 2016 2:23 pm
- Location: Middle of Hell, Florida
Re: NonStopTuning Aluminum Alternator Brackets
Well, I guess this post could put it out there. I was going to cut down mine since It came with P/S.
I think there would be good interest in it as it cleans up the bay even more.
Guess we'll see. Thanks for being open
I think there would be good interest in it as it cleans up the bay even more.
Guess we'll see. Thanks for being open
Success guardian... Successsssssss..
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
Thank you all for the recent support!
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
Thank you guys for the recent support.
Much appreciated!
Much appreciated!
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
Have one of these little guys on your 4AG? Feel free to post pics!
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
Thank you guys for the recent inquiries and orders. And yes, these little pieces are in stock!
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
We've received a few inquiries asking about availability on these little brackets.
YES! They are IN STOCK and ready for shipping!!
YES! They are IN STOCK and ready for shipping!!
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
These are IN STOCK and available!!!
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
Thank you for the recent inquiries and orders, ladies and gents!
YES, these little guys are in stock!!
YES, these little guys are in stock!!
-
- Club4AG Pro
- Posts: 644
- Joined: Thu Oct 06, 2016 2:23 pm
- Location: Middle of Hell, Florida
Re: NonStopTuning Aluminum Alternator Brackets
lightweight Idler pulley brackets?
Success guardian... Successsssssss..
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
NST Alternator Brackets are IN STOCK again!
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
86,000,000 thanks for all the inquiries and orders recently.
YES, these little brackets are in stock and ready for shipping!
-
- Club4AG Expert
- Posts: 489
- Joined: Mon Jan 14, 2013 5:34 pm
- Location: USA
- Contact:
Re: NonStopTuning Aluminum Alternator Brackets
HAPPY 86 DAY EVERYONE