I'm using this archived topic as my basis of the Jdm Analog information
http://forums.club4ag.com/zerothread?id=48519After completing the Jdm Analog wiring i'm assuming the 2 plugs should look like this
The white plug on the left
The blue plug on the right
And one more picture showing both plugs
Here's a list that I've made using Shannon's old pictures of how the wires are arranged.
Updated with more info!
JDM Analog ClusterLeft White Plug1:Green with black stripe & brown dot-
Turn Signal switch Terminal TL2:Green with yellow stripe & brown dot-
Turn Signal switch Termial TR3:Yellow with red stripe-
Fuel Sender gauge4:Red with black Stripe-
Brake Fluid warning/Parking brake5:
BLANK6:Blue with white stripe-
DOME fuse7:Red with green stripe & blue dot-
Efi Computer8:Red with white stripe-
Door Courtesy Switch9:Yellow with blue stripe-
Fuel Level warning10:White with black stripe and pink dot-
Ground11:
BLANK12:
BLANK13:
BLANK14:
BLANKRight Blue Plug1:Red with blue stripe-
Gauge fuse2:Black with brown dot-
Ignition Coil3:Black brown stripe-
Ignition Fuse4:Yellow with red dot-
Charge Fuse5:Brown with black dot-
Ground6:Red with green stripe-
Dimmer Switch Terminal HU7:
BLANK8:Red-
Efi Computer9:Yellow with black stripe-
Oil Pressure10:
BLANK11:Yellow with green stripe-
Water temp12:Brown with black dot & white stripe-
Ground13:Black with blue stripe & brown dot-
Tail Fuse14:Green with red dot-
Rheostat or GroundDigital Cluster*Will include info later*
USDM Left 1:
blank 2:TAIL fuse
3:Rheostat or Ground
4:water temp sender gauge
5:gauge fuse
6:brake fluid lvl warning/parke brake switch
7:efi cpu
8:oil pressure sender gauge
9:ign fuse
10:charge fuse
11:
blank 12:dimmer switch terminal HU
13:
blank 14:
blank Right15:dizzy(ignition coil)
16:ground
17:blank(chime)
18:cruise control cpu(efi cpu)
19:ground
20:DOME fuse
21:door courtesy switch
22:seat belt warning
23:blank(hazard lights)
24:fuel level warning
25:fuel sender gauge
26:ground
27:turn signal switch terminal TL
28:Turn signal switch terminal TR