Ae86 Cluster Conversions! Usdm, Jdm Digital & Jdm Analog

The Robot Cow
Club4AG Enthusiast
Posts: 77
Joined: Wed Jan 09, 2013 3:28 pm
Location: Cen-Cal

Ae86 Cluster Conversions! Usdm, Jdm Digital & Jdm Analog

Postby The Robot Cow » Mon Feb 03, 2014 1:33 pm

Hey there, I'm trying to put together a source for myself(and you guys) on how to rewire your harness for a jdm analog cluster since it's almost impossible to find a source that has this info. I will update this as i go along. Any help is welcome!

*Edit*
Since i'm going from my digital cluster to a Jdm analog i'll add the info on how my cluster is wired
Last edited by The Robot Cow on Fri Feb 07, 2014 11:12 am, edited 1 time in total.
1985 Corolla Gts Coupe

The Robot Cow
Club4AG Enthusiast
Posts: 77
Joined: Wed Jan 09, 2013 3:28 pm
Location: Cen-Cal

Re: JDM analog cluster conversion

Postby The Robot Cow » Mon Feb 03, 2014 10:30 pm

I'm using this archived topic as my basis of the Jdm Analog information
http://forums.club4ag.com/zerothread?id=48519

After completing the Jdm Analog wiring i'm assuming the 2 plugs should look like this
The white plug on the left
Image

The blue plug on the right
Image

And one more picture showing both plugs
Image

Here's a list that I've made using Shannon's old pictures of how the wires are arranged.
Updated with more info!
JDM Analog Cluster
Left White Plug
1:Green with black stripe & brown dot-Turn Signal switch Terminal TL
2:Green with yellow stripe & brown dot-Turn Signal switch Termial TR
3:Yellow with red stripe-Fuel Sender gauge
4:Red with black Stripe-Brake Fluid warning/Parking brake
5:BLANK
6:Blue with white stripe-DOME fuse
7:Red with green stripe & blue dot-Efi Computer

8:Red with white stripe-Door Courtesy Switch
9:Yellow with blue stripe-Fuel Level warning
10:White with black stripe and pink dot-Ground
11:BLANK
12:BLANK
13:BLANK
14:BLANK

Right Blue Plug
1:Red with blue stripe-Gauge fuse
2:Black with brown dot-Ignition Coil
3:Black brown stripe-Ignition Fuse
4:Yellow with red dot-Charge Fuse
5:Brown with black dot-Ground
6:Red with green stripe-Dimmer Switch Terminal HU
7:BLANK

8:Red-Efi Computer
9:Yellow with black stripe-Oil Pressure
10:BLANK
11:Yellow with green stripe-Water temp
12:Brown with black dot & white stripe-Ground
13:Black with blue stripe & brown dot-Tail Fuse
14:Green with red dot-Rheostat or Ground

Digital Cluster
*Will include info later*

USDM
Left
1:blank
2:TAIL fuse
3:Rheostat or Ground
4:water temp sender gauge
5:gauge fuse
6:brake fluid lvl warning/parke brake switch
7:efi cpu
8:oil pressure sender gauge
9:ign fuse
10:charge fuse
11:blank
12:dimmer switch terminal HU
13:blank
14:blank

Right
15:dizzy(ignition coil)
16:ground
17:blank(chime)
18:cruise control cpu(efi cpu)
19:ground
20:DOME fuse
21:door courtesy switch
22:seat belt warning
23:blank(hazard lights)
24:fuel level warning
25:fuel sender gauge
26:ground
27:turn signal switch terminal TL
28:Turn signal switch terminal TR
Last edited by The Robot Cow on Fri Feb 07, 2014 11:16 am, edited 3 times in total.
1985 Corolla Gts Coupe

The Robot Cow
Club4AG Enthusiast
Posts: 77
Joined: Wed Jan 09, 2013 3:28 pm
Location: Cen-Cal

Re: JDM analog cluster conversion

Postby The Robot Cow » Tue Feb 04, 2014 12:57 am

What throws me off is the use of 2 Efi computer wires on the jdm/edm. Is there just 2 efi wires? On the USDM repair manual the 2nd efi computer is listed as the Cruise Control hmm...
1985 Corolla Gts Coupe

User avatar
morgan
Club4AG Pro
Posts: 918
Joined: Thu Jan 10, 2013 10:29 pm
Location: og, nj

Re: JDM analog cluster conversion

Postby morgan » Tue Feb 04, 2014 7:08 am

i have a few pages of notes from a friend who did this, look like I need to dig my old camera out, I know I have pics of the pages. might be on the old forum, have you searched there?
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up

choyr
Club4AG Regular
Posts: 13
Joined: Tue Jul 02, 2013 11:19 pm

Re: Ae86 Cluster Conversions! Usdm, Jdm Digital & Jdm Analog

Postby choyr » Thu Aug 21, 2014 5:03 am

are there still differences of digital clusters? USDM abd EUDM? How to know the differences?

strmrdr23
Club4AG Enthusiast
Posts: 94
Joined: Thu Jan 10, 2013 8:11 pm

Re: JDM analog cluster conversion

Postby strmrdr23 » Tue May 02, 2017 3:48 pm

The Robot Cow wrote:I'm using this archived topic as my basis of the Jdm Analog information
http://forums.club4ag.com/zerothread?id=48519

After completing the Jdm Analog wiring i'm assuming the 2 plugs should look like this
The white plug on the left
Image

The blue plug on the right
Image

And one more picture showing both plugs
Image

Here's a list that I've made using Shannon's old pictures of how the wires are arranged.
Updated with more info!
JDM Analog Cluster
Left White Plug
1:Green with black stripe & brown dot-Turn Signal switch Terminal TL
2:Green with yellow stripe & brown dot-Turn Signal switch Termial TR
3:Yellow with red stripe-Fuel Sender gauge
4:Red with black Stripe-Brake Fluid warning/Parking brake
5:BLANK
6:Blue with white stripe-DOME fuse
7:Red with green stripe & blue dot-Efi Computer

8:Red with white stripe-Door Courtesy Switch
9:Yellow with blue stripe-Fuel Level warning
10:White with black stripe and pink dot-Ground
11:BLANK
12:BLANK
13:BLANK
14:BLANK

Right Blue Plug
1:Red with blue stripe-Gauge fuse
2:Black with brown dot-Ignition Coil
3:Black brown stripe-Ignition Fuse
4:Yellow with red dot-Charge Fuse
5:Brown with black dot-Ground
6:Red with green stripe-Dimmer Switch Terminal HU
7:BLANK

8:Red-Efi Computer
9:Yellow with black stripe-Oil Pressure
10:BLANK
11:Yellow with green stripe-Water temp
12:Brown with black dot & white stripe-Ground
13:Black with blue stripe & brown dot-Tail Fuse
14:Green with red dot-Rheostat or Ground

Digital Cluster
*Will include info later*

USDM
Left
1:blank
2:TAIL fuse
3:Rheostat or Ground
4:water temp sender gauge
5:gauge fuse
6:brake fluid lvl warning/parke brake switch
7:efi cpu
8:oil pressure sender gauge
9:ign fuse
10:charge fuse
11:blank
12:dimmer switch terminal HU
13:blank
14:blank

Right
15:dizzy(ignition coil)
16:ground
17:blank(chime)
18:cruise control cpu(efi cpu)
19:ground
20:DOME fuse
21:door courtesy switch
22:seat belt warning
23:blank(hazard lights)
24:fuel level warning
25:fuel sender gauge
26:ground
27:turn signal switch terminal TL
28:Turn signal switch terminal TR


sorry to bump this from the dead but the link to the old walk through appears to have died. anybody have a walk through for wiring analog jdm cluster to usdm ae86? i have an SK engineering cluster i may try to tackle installing (i'm super color blind so this will be interesting).