Anybody happen to know the bolt size/pattern/pitch of the bolts for kouki JDM rear bumper brackets?

What I did was went to the hardware store, and asked someone who worked there if i could take a few out of the store and try them on the car. That is obviously if you drive your car with no bumper like I did for months

Remove one bolt of from your dizzy its the correct size and go to hardware store get the same bolt I think m10x1,25 I think

Try M12-1.25 x 35mm

Yeah m12\1.25 not m10 like my previous post haha

Managed to track down a couple M12 x1.25 and they fit. Turns out there was some build up in the threads on my brackets that was keeping those bolts from going in before. Thanks for the help guys