Does any one have a full write up on how to install and wire 20v itbs on redtop 16v im planning on using a haltech standalone any help would e apreciated ty

My build thread has a lot of info on what you need to do. I'd also be happy to give you pointers if you pm me. I also think there is a thread on the old site you can dig up.

Here is the link: http://web.archive.org/web/201205080131 ... d?id=51345

awesome, ill be looking thru your build and i will most likey hitting you up for some things here and there. just picked up a fresh small port and some silver top itb's should be a good time =]