AE86 Lower rubber radiator mounts
AE86 Lower rubber radiator mounts
Hey guys, I'm having a very hard time finding some AE86 lower rubber radiator mounts. I looked online for them, but no luck. Is there any cross models like Honda, Nissan or any other Toyota model that would fit? Thanks Guys...
Re: AE86 Lower rubber radiator mounts
For what it's worth, I've used heater hose as a spring insulator without issue.
Odds are any spare rubber fuel line, power steering return hose, or small heater hose can be used to rig up a decent bushing.
Hope it helps,
Nick. ^_^
Odds are any spare rubber fuel line, power steering return hose, or small heater hose can be used to rig up a decent bushing.
Hope it helps,
Nick. ^_^
Re: AE86 Lower rubber radiator mounts
Thanks Nick94tt, so basically we don't want the bottom of the tank hitting the radiator support. By using a three inch long hose with a hole that the radiator dowel pin will fit, should do the trick... Not very pretty, but I think it might work.... LOL...
Hey, Thanks Nick94tt...

Re: AE86 Lower rubber radiator mounts
Give a person a fish, they eat for a day. Suggest they search before posting, and they learn a skill for a lifetime.
Re: AE86 Lower rubber radiator mounts
jondee86 wrote:http://www.hachiroku.net/forums/forum/main-category/tech-and-performance/34788-diy-radiator-isolater-bushings
Cheers... jondee86
I had a feeling someone would have the non-hack answer, lol. Been a while since I installed my aluminum radiator (5 years or so...)

Last time I did similar was to save a friend some money after they had a small mishap in a cavalier. Repairs were going to cost more than the car was worth - retail.



Re: AE86 Lower rubber radiator mounts
Hey thanks a lot guys.. I really appreciate your help..
- Rogue-AE95
- Club4AG Expert
- Posts: 442
- Joined: Thu Jan 10, 2013 4:03 pm
- Location: Tampa Bay, FL
Re: AE86 Lower rubber radiator mounts
I know it's not quite the same setup, but when I fit a Honda Civic "half size" aluminum radiator into my AE95 I had temporarily used one of these (or another size, I forget) on the Civic rad mount that I had to add.
https://www.homedepot.com/p/Everbilt-3- ... /203661016
Of course I had ordered the correct Honda part, but for temporary purposes this leg tip thing worked fine with some slight modifications.
https://www.homedepot.com/p/Everbilt-3- ... /203661016
Of course I had ordered the correct Honda part, but for temporary purposes this leg tip thing worked fine with some slight modifications.
'88 Corolla All-Trac
Re: AE86 Lower rubber radiator mounts
That so funny, because I have a Honda Civic half radiator as well and plan A was to install it in my AE86. Modifying a lower radiator support bracket would be a bit stressful, so decided to go to plan B. An aftermarket aluminum stock replacement. But after buying this radiator, that's where my journey began... lol...
But, thanks a lot guys.

Return to “TECH: Corolla AE86”
Who is online
Users browsing this forum: No registered users and 5 guests