Can anyone shoot me a picture of how the resistor pack for the injectors mounts? I took it off to PC and forgot lol.

Also the manifold stay bracket..if you could..

If I can remember, I will take a pic tonight. In the mean time. The resistor pack mounts to a little bracket that is spot welded to the body under where the Maf goes.

Manifold bracket bolts to hole in side of manifold, other end is a threaded hole on the motor mount bracket.

Thanks MisterJerk,

On my GT-S the resistor pack isn't permanently mounted. It screws onto the bracket, and the bracket bolts to a chassis thread. I'm just not sure where lol. I have a new fuel filter with bracket I want to throw on, but I wanted to wait because I vaguely remember that the resistor pack had to come off first..

The only question I have about the manifold bracket.. Is it gonna be a bitch to get on the motor mount side?

Meant to post these and forgot....sorry for the delay my bro.
Kinda hard to get the camera down in there but here is the fuel injector resistor. You can see the relation with the water overflow container in the background and the ac low pressure line next to the mounting bracket...


Here is the intake manifold stabilizer (2 pics)
At the motor mount.


At the intake manifold mounting location


Hope these help....lemme know if you need a better angle.

Thanks bro that helps so much! I don't know why but I like the gold on your resistor pack lol.

CloudStrife wrote:Thanks bro that helps so much! I don't know why but I like the gold on your resistor pack lol.

Hehe...gold makes everything look more important. It was all crusty and corroded so I decided to clean it up a little and had some extra paint lying around.