Pic Inside.....help identify this part?

notnilc20
Club4AG Pro
Posts: 575
Joined: Sun Dec 27, 2015 7:56 pm
Location: Memphis

Pic Inside.....help identify this part?

Postby notnilc20 » Sat Jan 14, 2017 7:55 am

I know it's the fuel injector resistor but what car is it from? It was in my box o' parts. I ask because it has 2 plugs on it....not the typical 1 plugger. Thanks.

Image

notnilc20
Club4AG Pro
Posts: 575
Joined: Sun Dec 27, 2015 7:56 pm
Location: Memphis

Re: Pic Inside.....help identify this part?

Postby notnilc20 » Sat Jan 14, 2017 4:39 pm

Here's another part in the bin...looks like some kind of a crank or timing sensor.....might be from a 20v as it was with the other 20v parts....any ideas?
Image

User avatar
Jeonsah
Club4AG Expert
Posts: 455
Joined: Wed Jan 09, 2013 10:44 pm

Re: Pic Inside.....help identify this part?

Postby Jeonsah » Mon Jan 16, 2017 5:50 am

1st one is a resistor box for the 16v 4age largeport AE86. Not sure what the second one is. Dont have that part on my BT 20v.

notnilc20
Club4AG Pro
Posts: 575
Joined: Sun Dec 27, 2015 7:56 pm
Location: Memphis

Re: Pic Inside.....help identify this part?

Postby notnilc20 » Mon Jan 16, 2017 11:26 am

Jeonsah wrote:1st one is a resistor box for the 16v 4age largeport AE86. Not sure what the second one is. Dont have that part on my BT 20v.


Thanks for reply....but why does it have 2 plugs? All the ones i've seen including one on my car has only 1 plug.

User avatar
morgan
Club4AG Pro
Posts: 918
Joined: Thu Jan 10, 2013 10:29 pm
Location: og, nj

Re: Pic Inside.....help identify this part?

Postby morgan » Thu Jan 19, 2017 9:34 am

the 2 plugs could be from something like a v6 or v8? the 2nd looks like a sensor from a 1zz or something, cam angle sensor though for sure. do you have p/n's on anything?
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up

notnilc20
Club4AG Pro
Posts: 575
Joined: Sun Dec 27, 2015 7:56 pm
Location: Memphis

Re: Pic Inside.....help identify this part?

Postby notnilc20 » Thu Jan 19, 2017 12:25 pm

morgan wrote:the 2 plugs could be from something like a v6 or v8? the 2nd looks like a sensor from a 1zz or something, cam angle sensor though for sure. do you have p/n's on anything?


Thanks for the help......no part numbers on anything...maybe if i cleaned the fi resistor box it might reveal a part number but the sensor does not have a part number. Thanks.

User avatar
jondee86
Moderator
Posts: 2910
Joined: Fri Jan 11, 2013 10:21 pm
Location: Wellington, New Zealand

Re: Pic Inside.....help identify this part?

Postby jondee86 » Thu Jan 19, 2017 12:37 pm

Google says this....

Image

Toyota HiLux Pickup Truck 4Runner 22RE INJECTOR RESISTOR ballast EFI 28515-28030


Cheers... jondee86
The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.

notnilc20
Club4AG Pro
Posts: 575
Joined: Sun Dec 27, 2015 7:56 pm
Location: Memphis

Re: Pic Inside.....help identify this part?

Postby notnilc20 » Fri Jan 20, 2017 6:06 am

jondee86 wrote:Google says this....

Image

Toyota HiLux Pickup Truck 4Runner 22RE INJECTOR RESISTOR ballast EFI 28515-28030


Cheers... jondee86

Oh nice! And a part number to boot. Thanks....now for the sensor.

4agshoob
Club4AG Expert
Posts: 228
Joined: Fri May 03, 2013 8:18 pm
Location: ATL, GA

Re: Pic Inside.....help identify this part?

Postby 4agshoob » Sun Mar 12, 2017 9:47 pm

The sensor looks like a cam or crank sensor from a1uzfe.
Image

4agshoob
Club4AG Expert
Posts: 228
Joined: Fri May 03, 2013 8:18 pm
Location: ATL, GA

Re: Pic Inside.....help identify this part?

Postby 4agshoob » Sun Mar 12, 2017 9:48 pm

Leaning towards crank sensor though. Seems i remember it due to it being held in by 1 10mm bolt.
Image

notnilc20
Club4AG Pro
Posts: 575
Joined: Sun Dec 27, 2015 7:56 pm
Location: Memphis

Re: Pic Inside.....help identify this part?

Postby notnilc20 » Tue Mar 14, 2017 10:08 am

4agshoob wrote:Leaning towards crank sensor though. Seems i remember it due to it being held in by 1 10mm bolt.


Yeah I was thinking it was a crank sensor but didnt know from what engine...1uz you say? Thank you very much for the info.