Hey Club,

Corolla GTS 1986

I have extended lug studs from the front wheel assembly I got from my parts car.
Can i use them on my rear? Plan on using a slim, slip on spacer.

lugs are a good 1" longer than stock. Will probably use 25mm spacers.

Thanks

Here is some information on the OEM studs from my AE86 (JDM spec)...



Measurements are from under the head.

All of these studs have the 14.17-14.20 knurl and will happily pull into
AE86 hubs without raising a sweat. So if your long studs pulled into
front hubs, they should work on the rear hubs.

Cheers... jondee86

Thank you sir!