32/36 possible re-jetting help,?

LePimpOfPimps
Club4AG Enthusiast
Posts: 70
Joined: Tue Feb 18, 2014 7:12 pm
Location: 9280x

32/36 possible re-jetting help,?

Postby LePimpOfPimps » Tue Jun 10, 2014 3:52 pm

So I have a Weber on my 3tc and it says to start from a baseline start, with 1 turn in on the speed screw and 2 turns out on the mixture,. thing is, car runs fine at about 2 turns out on the mixture, but I can have the idle speed screw without any contact to the throttle,? If I turn the screw in I'll be over idling at around 1,100 rpm,?
1976' Corolla/Levin TE37 3TC

LePimpOfPimps
Club4AG Enthusiast
Posts: 70
Joined: Tue Feb 18, 2014 7:12 pm
Location: 9280x

Re: 32/36 possible re-jetting help,?

Postby LePimpOfPimps » Fri Jun 13, 2014 11:56 pm

Just remembered I Have the distributor at full advance,. Just started playing Round with it last week or so,. I noticed when I did that the engine ran better Nd had a throat sound to it, a bit more torque but Idk feels like I could still get more power somehow,?
1976' Corolla/Levin TE37 3TC