Page 1 of 1

wiring question (not problem)

Posted: Sat Jan 19, 2013 5:27 am
by NAallDAY
i have an 87 GTS coupe. 16v with ST itb t3 adapter and the megaspuirt plug n play 2.

what did you guys do with all the wiring that used to run through the intake manifold?? its definately in the way. im running the itg jc40/100 filter and its actually pretty cumbersome.

does anyone you know of make "slim" or "tucked" harnesses for our cars? or will i have to do it myself like 70% of other problems ive had.

let me know thanks,
daniel

Re: wiring question (not problem)

Posted: Sat Jan 19, 2013 1:22 pm
by NAallDAY
or even if anyone can post input/pictures of how they got around this problem/ thats be great! i have the swap in, but have yet to hook up any wiring, got too lazy last night. i can post pics of what i got if anyone is interested

thanks,
daniel

Re: wiring question (not problem)

Posted: Mon Jan 21, 2013 7:05 pm
by HASport AE86
Does the car run?

Re: wiring question (not problem)

Posted: Tue Jan 22, 2013 9:45 am
by NAallDAY
yes, i know the motor is good. i drove the mr2 before i bought the motor from the guy. main question is on a tvis usdm 16v the bulk of the harness is bolted to the intake mani in the valley. now with itbs and a huge filter i cant put the harness right there. im thinking i will extend the wires for the injectors, coolant sensors, engine temp, and route the bulk of it behind the head using bolt on wire hangers.