Manual Rack Tie Rods Different

[Yatch]

I was swapping over to manual from PS rack and i saw that the tie rods that i bought and the tie rods that are installed are different. I have a 84 hatch built June 1984 and i bought the manual inner and outer tie rods? I didn't install them all the way just hand tight without dust boots but they look like their going to be to long. I don't know if I bought the wrong part or if it even matters. P/s rack on top Manual on the bottom. If anyone could help me out i would really appreciate it. Thanks
Pics Below

[AE86_WolfPack]

I don't know if too long is a bad thing because I think you now have increased steering angle for your super speed entry drifts
But if you use power steering tie rods on a manual rack its like a ghetto, super free, steering angle upgrade.
I think it should be fine, correct me if I'm wrong others.

[Deuce Cam]

The tie rods on the manual rack in that picture won't work. They look like mr2 or fwd corolla tie rods.

[Yatch]

Both the inner and outers look wrong? And should the outers be long and curved like P/S ones?

[Deuce Cam]

Check this link for a picture: http://www.hachiroku.net/forums/showthread.php?t=29856

That's how the ae86 tie rods look. Most places have the ae86 tie rods listed under "corolla coupe" or "corolla 2-door" for your model year.

[Yatch]

Oh okay so that was my problem I got the inners and outers for the hatchback.
Thanks for explaining that Deuce Cam

[hachiroku ae86]

the coupe and hatch tie rods are the same it doesnt matter witch ones you run,ive ran them both on my manual rack and have never had a problem,just with some brands of tie rods you have to cut them down a little bit to work on the manual rack.