Okay heres the deal, my car is an 87 SR5 coupe slammed to the ground on blown shocks and whats left of some drop springs Under powered like a BOSS, but with 13's its still fun as I have recently aquired an unfinished SR5-GTS converted 86 coupe, with a Largeport 4AG from a buddy! Since my car exterior/interior wise is muchhh cleaner, and I have a thing about finishing other ppls projects, I am stripping everything from that car and using it for mine
The reason why I am going with carburetion is because I just like carbs, and Ive seen a lot a bad ass carb'd 4AG's! Any advice from you guys running carb'd setups would be great!

I'll start of with some pics of the car so far.

When I first got it, it didnt even run!~







Bodywork/Paint~













Straight Pipe!!!~




Scored a Zenki Levin Bumper!! Custom fit to my Trueno With Custom Bumper Support!~

CUTTING SPRINGS MORE/ KSPORT CAMBER PLATES ~

STITCH WELDED MY WHOLE TRUNK AREA + ADDED SUPPORT BAR!!~






SOME DRIFT PICS!!!~~

Okay so now that we're up to date, Heres some pics of the parts car I just picked up!!`





DECIDED TO RUN THE DRAGS ON MY CAR FOR A BIT


HOW MY CAR LOOKS ATM!!~



HOW THE PARTS CAR LOOKS ATM!!~

You got a real nice project 86! A carbed 4age 16v is pretty good when done right and of course w/supporting mods. You have a lot of options on carburetors, you can go with the latest and greatest technology carburetors or you can simply stick with the old school. Here's a thread of my build if you're curious.. viewtopic.php?f=7&t=4076

Progress on the 4AG is currently at a stand still due to current job of rebuilding this 22r for a friend...

TANTALUS! Cheehu!!! Nice ur car cuz. Where u live, Kailua?

YOTAHOLIC808 wrote:Question:
SINCE MSD TIMING CURVE COMPS 8980 and 81 ARE HARD TO FIND, I WAS CURIOUS ABOUT THE ACCEL 500+ SYSTEM! Anyone know anything about this setup?

I think it comes down to personal preference, price, and availability. I got the 6AL-2 like most other carb swaps, but the Accel 500 looks pretty close, if not the same. The one thing I notice that's missing from any of um, is the ability to compensate for load like stock distributor setups used to (i.e. weights, vac advance, etc). IMO, Dr. Occa's is a good guy to get a hold of, he's helped me out a lot when I was building mine. Good luck n keep it going

808AE86inAZ wrote:TANTALUS! Cheehu!!! Nice ur car cuz. Where u live, Kailua?

I think it comes down to personal preference, price, and availability. I got the 6AL-2 like most other carb swaps, but the Accel 500 looks pretty close, if not the same. The one thing I notice that's missing from any of um, is the ability to compensate for load like stock distributor setups used to (i.e. weights, vac advance, etc). IMO, Dr. Occa's is a good guy to get a hold of, he's helped me out a lot when I was building mine. Good luck n keep it going

Yeah i live Kailua! Haha, And when it comes time for ignition im hoping to source a MSD setup! I read Dr. Occa's carb thread all the time haha. Ive also been looking into the XDI setup, seems pretty sick having no dizzy but cant really find too much info on it here...

$$$$$$$$

Not sure if I missed it,got a color code for the paint?i got a thing for a creme-ish color.thinking about a paint scheme for mine.sweet build,looks like you are having a blast with it,as that's how it should be!

I have heard that the Hawaiian car community is just awesome and this was a way to prove it.

A carb'd 4AGE swap is just what you need! What is your budget though? Lots of Toda parts on your wish list.....

carbd7age wrote:A carb'd 4AGE swap is just what you need! What is your budget though? Lots of Toda parts on your wish list.....

Budget?? Im selling my soul

aF wrote:Not sure if I missed it,got a color code for the paint?i got a thing for a creme-ish color.thinking about a paint scheme for mine.

Its some rattle can "rust tough" stuff from Oreillys haha i think the color is ALMOND

Nice! I jsut picked up a 86 coupe sr5. and excited to join the Hawaii ae86 scene

Some Fun in the rain!~









Got 2 Diffs.. So I welded one up!

^ Couple things. First, look up the price of Keihin FCR 41mm carburetors. Second, if you don't have access to precise machinery (a GOOD and I mean GOOD mill) it will be hell. Third, you need to be REALLY good with a TIG welder (or know someone who is). Fourth, Nothing lines up. How do i know, look at my build thread.

poorutron wrote:FCR sounds nice and guy seems to have a positive response to it!

Haha yeah ofcourse FCR sounds nice! Here you go http://www.youtube.com/watch?v=vURwArclj_U

ogdougynutty wrote:^ Couple things. First, look up the price of Keihin FCR 41mm carburetors. Second, if you don't have access to precise machinery (a GOOD and I mean GOOD mill) it will be hell. Third, you need to be REALLY good with a TIG welder (or know someone who is). Fourth, Nothing lines up. How do i know, look at my build thread.

Wasnt planning on running FCR's anyway! was planning on Webers...BTW I consider myself a good fabricator and I have acess to anything you could think of at my work haha.. I plan on doing extensive ridiculous fabrication on my car! I saw the update on your build and those Mikunis look amazing! Keep posting! Hows the intake coming?

I traded my 15x7 DR20's for some 13x7 Appliance Mesh!! I like small wheels thats my fkn problem



I took out the rear springs and its still not low enough...

what brand r those steelies

So Its been a minute since I uploaded anything.. Latest updates - Welded Diff in! Soo much fun haha!~ http://www.youtube.com/watch?v=jDbXOrg1 ... re&index=1

1" Spacers Rear, 1.25" Front





Also Picked up a set of 14x6.5J Longchamps!! Soo happy, literally my dream wheels! ~




And Finally!!! Somebody bought my 4AC for 500$! haha! So this is it! the build FINALLY begins!!


http://www.youtube.com/watch?v=V7DfM0nH ... rTqJUkIGSg
Had to do one last burnout with the good ol' 4AC!!

Been really busy lately, but finally rolled the car out to the clean the bay so I can begin stripping, welding, fabbing custom rad support and what not to prepare for the 4AG. I plan on doing all of the chassis/suspension work first before I start on the engine build!






Also finished building this 22R for a friend so now I can just focus on my ****..!


Cant say I havent thought of putting a 22R in my Hachi

SOOOO I picked these badboys up today! Not exactly what I was planning but couldnt pass up on the deal!




! should be putting together the funds for the rest of my parts soon! hopefully...

Been doing alot of dirty work lately... stripping bay and interior, prepping for welding!








Got the engine just sitting for now


Gonna get fully blown out on the chassis build first! SUSPENSION LIST~

GROUND CONTROL COILOVER CONV. w/ TRD INSERTS
T3 CAMBER PLATES and NCRCA's
EXTENDED/BOXED LCA's
SHORTEND KNUCKLES
MANUAL RACK w/ Spacers and T3 TIE RODS
T3 TENSION RODS
T3 4 LINKS and PANHARD
either TRD Shocks/Springs or MCN REAR COILOVERS...undecided...

YOTAHOLIC808 wrote:Did some playing in the rain the other day! http://www.youtube.com/watch?v=krILwWDc ... ture=share

Norfolk right?! Mean da dope! We used to do run that at night!

Longchamps are fkn sickness btw. A guy I know in PHX was gonna sell me his 14x9J and 14x11J's but I turned um down... Seemed like too much work to get um to fit, plus 15" tires easier to find. Lookin good tho, SUBSCRIBED!!!

808AE86inAZ wrote:

YOTAHOLIC808 wrote:Did some playing in the rain the other day! http://www.youtube.com/watch?v=krILwWDc ... ture=share

Norfolk right?! Mean da dope! We used to do run that at night!

Longchamps are fkn sickness btw. A guy I know in PHX was gonna sell me his 14x9J and 14x11J's but I turned um down... Seemed like too much work to get um to fit, plus 15" tires easier to find. Lookin good tho, SUBSCRIBED!!!

Haha yup Norfolk.. and DAMMMNNN 14x9j and 11j holy **** thats pimp as ****!!!

Been doing some work on the chassis in my spare time.. Been super busy lately! But anyway PICS~





Also just bought KAMEARI Intake manifold, some TRD Adjustable Race Shocks front and rear, as well as TRD springs for the rear... Next week I will be ordering the rest of my suspension/chassis stuff from T3! Cant wait to start putting it all together!!