OST-028: Redline it baby....
Posted: Wed Jul 09, 2014 10:12 am
Yes... I know how to count, OST-027 hasn't been forgotten... ![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
So... onto OST-028 Redline it baby...
I get a tub from Fed Ex.... yes a tub
![Image](http://i62.tinypic.com/jr4sww.jpg)
![Image](http://i62.tinypic.com/nl998x.jpg)
As I unpack.... the goodies reveal themselves![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Image](http://i58.tinypic.com/8x0pz9.jpg)
Dig a bit further.... note the cam cover studs poking through??
![Image](http://i57.tinypic.com/11gn0ab.jpg)
Well the cam boxes were on top - note the punch marks in the cam outer packaging. No harm, no foul - the inner packaging, in this case, was not damaged, and neither were the cams.
![Image](http://i60.tinypic.com/2lxfct0.jpg)
also worth noting... the Redline DCOE manifold, along with the T3 TVIS delete plate.
My audience tends to enjoy my little quizzes.....![Smile :)](./images/smilies/icon_e_smile.gif)
length of intake port - mounting surface to back edge of intake valve = 4.1" (104mm)
thickness of T3 adapter = .9" (23mm)
The Redline DCOE manifold = 2.1"(53mm) Do to spacing... cyl 1 and 4 have a heavy taper and so valve #2 and #7 actually measure 2.35" (59mm).
The length of a DCOE (without velocity stack) = 4.64" (118mm)
Cams... Tomei Poncams - 264 duration (3500-8000) peak torque @ 5500
Sooooo... my question to you all is.... Does my client need/want to keep, the TVIS delete plate???
more to come.....![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
So... onto OST-028 Redline it baby...
I get a tub from Fed Ex.... yes a tub
![Image](http://i62.tinypic.com/jr4sww.jpg)
![Image](http://i62.tinypic.com/nl998x.jpg)
As I unpack.... the goodies reveal themselves
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Image](http://i58.tinypic.com/8x0pz9.jpg)
Dig a bit further.... note the cam cover studs poking through??
![Image](http://i57.tinypic.com/11gn0ab.jpg)
Well the cam boxes were on top - note the punch marks in the cam outer packaging. No harm, no foul - the inner packaging, in this case, was not damaged, and neither were the cams.
![Image](http://i60.tinypic.com/2lxfct0.jpg)
also worth noting... the Redline DCOE manifold, along with the T3 TVIS delete plate.
My audience tends to enjoy my little quizzes.....
![Smile :)](./images/smilies/icon_e_smile.gif)
length of intake port - mounting surface to back edge of intake valve = 4.1" (104mm)
thickness of T3 adapter = .9" (23mm)
The Redline DCOE manifold = 2.1"(53mm) Do to spacing... cyl 1 and 4 have a heavy taper and so valve #2 and #7 actually measure 2.35" (59mm).
The length of a DCOE (without velocity stack) = 4.64" (118mm)
Cams... Tomei Poncams - 264 duration (3500-8000) peak torque @ 5500
Sooooo... my question to you all is.... Does my client need/want to keep, the TVIS delete plate???
more to come.....
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)