been here for a while but never posted my project, feel like its the time
im from Quebec,Canada! so its almost time to take the car out, almost ready, needs to finish the front s13 suspension/brake swap.
bought it this summer in ontario (2013) after i searched a bit to find we she's been
2008 : vancouver british-columbia
2011 : ontario
2013 : ontario ( when i bought it... freakin dirty -_- )
straight from takumi
far from mint, but good enough for a 85 ! had a couple of goodies on it ;
-headers rsr
-complete exhaust
-front strut bar cusco
-gab front shock and blue coil ... getting replace with an s13 stance coilovers 9k
-rear agx shocks and cutted springs -_- allready replaced with T3 coilover 7k
-momo steering with hub ( already replaced with another momo deepdish)
-watanabee 13x6
-panhard bar ajustable
-RCA cusco
-big ass tach.... removed lol
-mushroom hks
-coil msd
and the guy who had it in 2008 refresh the bluetop so thats a good news
this winter i ''dry-iced'' the floor, replaced the shifter bushing (t3), bought a new trunk and installed a trd replica spoiler, bought a new zenki levin lip oem, new inner door handel and prothane bushing kit.
Gt-apex, in progress!
Gt-apex, in progress!
Last edited by jeepy on Sat Jul 26, 2014 10:19 am, edited 1 time in total.
Re: my gt-apex, in progress!
cool
1985 Corolla Hatch widebody w/ SR20det (The Project)
1993 5SGTE stroker widebody MR2 Turbo (drag car)
2002 Miata SE hardtop (daily Driver)
1994 4runner (The truck)
1993 5SGTE stroker widebody MR2 Turbo (drag car)
2002 Miata SE hardtop (daily Driver)
1994 4runner (The truck)
-
- Club4AG Enthusiast
- Posts: 113
- Joined: Sun Apr 07, 2013 2:48 am
Re: my gt-apex, in progress!
Any reason why you chose S13 front, and how are you going to tune out the bump-steer?
Re: my gt-apex, in progress!
well first for the big brakes, more angle, more track and a ton of parts available ( i now there is alot for 86 too ) and love more the disk over hub setup than under-hub.
as for the bumper steer ill know when i get to drive it, the alignement guy might help me with that. now ill be running early datsun bluebird 910 trx tie rod end. maybe ill need t3 with spherical joints, dont know yet... do you recommend anything?
as for the bumper steer ill know when i get to drive it, the alignement guy might help me with that. now ill be running early datsun bluebird 910 trx tie rod end. maybe ill need t3 with spherical joints, dont know yet... do you recommend anything?