the never ending story...
-
- Club4AG Regular
- Posts: 24
- Joined: Sun Dec 29, 2013 2:25 pm
- Location: Danbury CT 06810
- Contact:
Re: the never ending story...
awsome build Craig!! cant wait to cruise up to NJ and get up with you guys
Re: the never ending story...
Thanks Edwin. Ill be organizing another North East Cruise in the late spring once the motor is back in, check this thread for info, ill post a link to the event here.
Most all parts are finally here sans a few odds and ends. Heres whats waiting for me to yank the 20v...
-7AFE HG my 7afe vs. 20v 4age HG comparison thread
-copper exhaust gaskets
-oem 20v intake cam seal
-oem oil dipstick & tube
-oem 20v cam cover seal
-BT rods
-ARP head studs
-ITG itb filter
-oil filter relocation parts
-Goodyear timing belt
-Tomei FPR
-Aisin oil & water pumps w/associated gaskets/seals
-misc motor stuff
Also have a new hatch trim panel(& possibly a few more stashed...) along with the zenki jdm rear bumper in the background
Waiting on a few things...
-6AN lines & fittings
-exhaust cam seal
-my back to get better
Most all parts are finally here sans a few odds and ends. Heres whats waiting for me to yank the 20v...
-7AFE HG my 7afe vs. 20v 4age HG comparison thread
-copper exhaust gaskets
-oem 20v intake cam seal
-oem oil dipstick & tube
-oem 20v cam cover seal
-BT rods
-ARP head studs
-ITG itb filter
-oil filter relocation parts
-Goodyear timing belt
-Tomei FPR
-Aisin oil & water pumps w/associated gaskets/seals
-misc motor stuff
Also have a new hatch trim panel(& possibly a few more stashed...) along with the zenki jdm rear bumper in the background
Waiting on a few things...
-6AN lines & fittings
-exhaust cam seal
-my back to get better
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: the never ending story...
Just bought a lil "treat" for the 86...zenki jdm corners.
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: the never ending story...
I started reorganizing my plans after pulling the cover off to check something out on the car a few weeks back. with the car cover on it, and those nasty wheels sticking out, I forgot how nice this thing looks.
with the way my winter went, I opted to not do all the work to the 20v at this time. so I started putting stuff back together yesterday, since it was 85 degrees out. a few things from that long list will be done now or over the summer, but next winter I plan on doing the work now...fingers crossed. so I put all the ITB stuff back on and put a longer fuel feed line on and put the filter in the oem location, so I can install the ITG filter on.
also pulled the zenki corners and sanded the housings, then polished the lenses. a few blemishes on them so ill have to put a light layer of glaze on them, then paint them.
once its on the road again, ill start on refinishing these.
with the way my winter went, I opted to not do all the work to the 20v at this time. so I started putting stuff back together yesterday, since it was 85 degrees out. a few things from that long list will be done now or over the summer, but next winter I plan on doing the work now...fingers crossed. so I put all the ITB stuff back on and put a longer fuel feed line on and put the filter in the oem location, so I can install the ITG filter on.
also pulled the zenki corners and sanded the housings, then polished the lenses. a few blemishes on them so ill have to put a light layer of glaze on them, then paint them.
once its on the road again, ill start on refinishing these.
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
-
- Club4AG Enthusiast
- Posts: 185
- Joined: Thu Jan 10, 2013 10:55 am
Re: the never ending story...
morgan wrote:
I haven't seen a center console like that on an AE86 before... is that piece for an AE86 or off a different Toyota?
Re: the never ending story...
wasn't offered in the states, not sure on models though. Ive seen jdm cars with it, but bought these from a guy in PR. I like to mix it up
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
-
- Club4AG Enthusiast
- Posts: 185
- Joined: Thu Jan 10, 2013 10:55 am
Re: the never ending story...
morgan wrote:wasn't offered in the states, not sure on models though. Ive seen jdm cars with it, but bought these from a guy in PR. I like to mix it up
Cool
- grappletech
- Club4AG Expert
- Posts: 344
- Joined: Sat Jan 12, 2013 12:13 pm
Re: the never ending story...
I made an armrest not too long ago. I'll post pics at some point
87 GTS Coupe stock and Super Duper Clean
87 GTS Coupe Beams 3sge (under construction cuz I'm slow and lazy and broke-FML)
87 SR5 Coupe Shell. (Sold)
86 SR5 Hatch Shell
86 GT-SR5 Coupe 20v Swap
87 GTS Coupe Beams 3sge (under construction cuz I'm slow and lazy and broke-FML)
87 SR5 Coupe Shell. (Sold)
86 SR5 Hatch Shell
86 GT-SR5 Coupe 20v Swap
Re: the never ending story...
thank you!
finally back on the road today after 5 months of hibernation. some of my vacuum lines are mixed up still so it drives a little funky, should be an easy fix. heres whats been done so far...
finished the jdm zenki lights. im not going to leave these on all the time.
put a new hatch trim board on
and put some decals on, with the 20v in mind
finally back on the road today after 5 months of hibernation. some of my vacuum lines are mixed up still so it drives a little funky, should be an easy fix. heres whats been done so far...
finished the jdm zenki lights. im not going to leave these on all the time.
put a new hatch trim board on
and put some decals on, with the 20v in mind
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: the never ending story...
Man...I love this corolla! Have you been able to work on your JDM rear bumper at all? Looks great glad you are back driving it, must feel great!
Re: the never ending story...
I did a little to it, probably 50% of paint has been removed. Im going to start burning some late night oil to get that done
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: the never ending story...
forgot to post this as well. with the upcoming suspension upgrades im planning on, ill need a set of RCA's, so why not make them? Im taking a set of CAD modeling classes, Creo Parametrics, and have a final project to do and used that necessity to drive the final project. This isn't the finished product, as I still have the camber plate to do, but heres where im at with it now. most measurements taken from actual parts, strut housings shortened 40mm, etc. Plan is to use the T3 weld on kit.
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: the never ending story...
put the corners in, just need to find an emblem. I have a kouki but haven't chopped it up yet, its bnib so I don't know if I will.
finally put some more work in on this as well. shouldn't be much longer now...
finally put some more work in on this as well. shouldn't be much longer now...
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
- shadowwolf151
- Club4AG Regular
- Posts: 27
- Joined: Sat Jan 31, 2015 8:34 am
- Location: Jacksonvill, FL
Re: the never ending story...
morgan wrote:thank you!
and put some decals on, with the 20v in mind
Where did you get your decals from?
Re: the never ending story...
theres a guy from Portugal named Isac, he sells his stuff primarily through ebay.
http://www.ebay.com/usr/iaaraujo?_trksid=p2047675.l2559
http://www.ebay.com/usr/iaaraujo?_trksid=p2047675.l2559
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: the never ending story...
Found a bnib zenki emblem, cant put it on, ill leave the chopped up kouki on there
Paint removal on the rear skin is nearing completion.
Paint removal on the rear skin is nearing completion.
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: the never ending story...
been a long time since an update, lifes been hectic to say the least. I have done little things here and there, but nothing major.
BUT I decided it was time for this to go...
so I broke out the supplies, and got cracking at 7am while the kids slept
put some adhesion promoter on before the bumper paint
mocked up the Swangbiz bar
...and finished the install up, finally.
now the rear matches the front.
BUT I decided it was time for this to go...
so I broke out the supplies, and got cracking at 7am while the kids slept
put some adhesion promoter on before the bumper paint
mocked up the Swangbiz bar
...and finished the install up, finally.
now the rear matches the front.
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: the never ending story...
Sweet! Saw your pics a few days ago on fb. Any difference in rigidity with the swangbiz bar? How heavy are they?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: the never ending story...
I never had the oem mounts, but the bar is solid. thinking about adding extra mounts since it only utilizes 2 top holes, not all 8. I have some plans for the future with it. the best part was the fitment, do messing around tweaking things. bolt up and go.
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: the never ending story...
So the bumper's just held by those two top holes? I'd be so scared of losing it... Let us know about those plans to hold it from other spots
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: the never ending story...
the 2 rear holes, then the 2 in the fender wells at the front most corners, then one on each side below where the rear side markers would be. 6 in total
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
-
- Club4AG Enthusiast
- Posts: 185
- Joined: Thu Jan 10, 2013 10:55 am
Re: the never ending story...
morgan wrote:=Also pulled the zenki corners and sanded the housings, then polished the lenses. a few blemishes on them so ill have to put a light layer of glaze on them, then paint them.
Hey morgan,
How did you polish the lenses? I'd like to try this on the translucent plastics on my car
Re: the never ending story...
Meguirs plastic polish. in the 2nd pic you can se the bottle. I masked off everything but the lenses as you see, then used some 800 grit paper to smooth it out, then a finer grit, followed by the plastic polish and a clean rag...aka a tshirt I cut up for just this stuff.
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
-
- Club4AG Enthusiast
- Posts: 185
- Joined: Thu Jan 10, 2013 10:55 am
Re: the never ending story...
morgan wrote:Meguirs plastic polish. in the 2nd pic you can se the bottle. I masked off everything but the lenses as you see, then used some 800 grit paper to smooth it out, then a finer grit, followed by the plastic polish and a clean rag...aka a tshirt I cut up for just this stuff.
Cool, thanks for the info!
Does it matter if you wet sand or dry sand? Also, no issues sanding the raised lettering on the lenses?
Re: the never ending story...
Any time. The lenses were very clean, minimal sanding done and i left the lettering. I have another jdm set i might do that to.
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: the never ending story...
finally have my new suspension in the works. sent in my strut casings to T3 last week, set to arrive there today for credit. plan to buy the weld on kit with approx. 6.8Kg springs for the front to mate with these 5.1Kg TRD springs I snatched up new. that's a 15% softer rate than the popular 8Kg/6Kg setup. the rear AGX's are nearly new, and I have a new set for the front to drop in as well.
in the mean time, ive just been driving it around and enjoying the nice weather. put some oem jdm signals in the front, and wired them with usdm connectors. heres a few shots from the mountains I frequent in NY.
in the mean time, ive just been driving it around and enjoying the nice weather. put some oem jdm signals in the front, and wired them with usdm connectors. heres a few shots from the mountains I frequent in NY.
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: the never ending story...
just scheduled the 2015 Old School Toyota Cruise, for those who missed it last year and want to attend. theres a thread in the Events page here, and this is the fb event page.
https://www.facebook.com/events/1616692018594392/
https://www.facebook.com/events/1616692018594392/
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: the never ending story...
pretty self explanatory whats going on here, been burning the midnight oil a bit the past week. almost there...
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: the never ending story...
another night under the cover of darkness...
image hosting services
spent under 2 hours installing the front suspension, putting the hubs back on, and swapping out the rear springs. (15 minutes looking for lost camber plate bolts included. I love when things come together easily.)
then took a drive. very nice so far.
image hosting services
spent under 2 hours installing the front suspension, putting the hubs back on, and swapping out the rear springs. (15 minutes looking for lost camber plate bolts included. I love when things come together easily.)
then took a drive. very nice so far.
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up