I'm looking for an inexpensive clutch pressure plate set, as the stock exedy replacement I have is starting to slip.
I'm in 22151
WTB: Clutch/pressure plate
-
- Club4AG Pro
- Posts: 582
- Joined: Wed Jan 09, 2013 6:10 pm
WTB: Clutch/pressure plate
RTFM!!!!!!!!!!! --> http://www.aeu86.org/technical/
Re: WTB: Clutch/pressure plate
If you don't mind used I have this:
![Image](http://i876.photobucket.com/albums/ab328/deucecam/DSCF1473_zps575f811f.jpg)
Full 8 bolt 200 mm set: oem flywheel w/ hardware, aisin clutch disk/cover/pressure plate. Still good, pulled from my old 4age when I parted it out. $40 shipped.
![Image](http://i876.photobucket.com/albums/ab328/deucecam/DSCF1473_zps575f811f.jpg)
Full 8 bolt 200 mm set: oem flywheel w/ hardware, aisin clutch disk/cover/pressure plate. Still good, pulled from my old 4age when I parted it out. $40 shipped.
-
- Club4AG Pro
- Posts: 582
- Joined: Wed Jan 09, 2013 6:10 pm
Re: WTB: Clutch/pressure plate
How much meat is left on the clutch disk?
~Scott
~Scott
RTFM!!!!!!!!!!! --> http://www.aeu86.org/technical/
Re: WTB: Clutch/pressure plate
I'm not really an expert but here are pics. Seams to have meat left.
![Image](http://i876.photobucket.com/albums/ab328/deucecam/DSCF1504_zps62da6545.jpg)
![Image](http://i876.photobucket.com/albums/ab328/deucecam/DSCF1505_zps95b2c1f2.jpg)
![Image](http://i876.photobucket.com/albums/ab328/deucecam/DSCF1506_zps1c577d1a.jpg)
![Image](http://i876.photobucket.com/albums/ab328/deucecam/DSCF1504_zps62da6545.jpg)
![Image](http://i876.photobucket.com/albums/ab328/deucecam/DSCF1505_zps95b2c1f2.jpg)
![Image](http://i876.photobucket.com/albums/ab328/deucecam/DSCF1506_zps1c577d1a.jpg)
Re: WTB: Clutch/pressure plate
I think have one or 2 sets with low miles but they are 212mm. lmk
Text me at 914 848 one four five zero
Text me at 914 848 one four five zero
Re: WTB: Clutch/pressure plate
I have a 200mm clutch with pressure plate that has 7.6mm of meat left. well with in spec ill sell it for 30 + shipping LMK. I have a 200mm 8 hole flywheel also if you need it
-
- Club4AG Pro
- Posts: 582
- Joined: Wed Jan 09, 2013 6:10 pm
Re: WTB: Clutch/pressure plate
Deuce, Looks kind of thin. I will let you know.
Joe, 212mm is too big(stock is 200mm, right?)
Gagoosh, I will let you know.
Joe, 212mm is too big(stock is 200mm, right?)
Gagoosh, I will let you know.
RTFM!!!!!!!!!!! --> http://www.aeu86.org/technical/