Page 1 of 1

TRD Multi-ECU programming software floppies

Posted: Fri Feb 08, 2019 1:17 am
by Toyoloog
As per title I'm after another set of floppies as mine are so aged that the magnetic coating let go and therefore ruined the floppies...

Part number:
80901-SP001 for the 3.5" disks, or
80901-SP002 for the 5ΒΌ" disks.

Each part number is 2 floppies, a program disk and a data disk. Either number will be fine, heck I'll even take a good floppy image from the 2 disks. They don't have to be originals.
(For those not aware, these are floppies with software to program the TRD multi-ECU and is only for the NEC PC98 computers. They won't run on any IBM compatible machine, unless used in an emulator) If interested I can post the manual here as well but it's all in Japanese so might want some translation...

Re: TRD Multi-ECU programming software floppies

Posted: Fri Feb 08, 2019 7:03 am
by oldeskewltoy
would like to see the manual

Re: TRD Multi-ECU programming software floppies

Posted: Fri Feb 08, 2019 9:03 am
by Toyoloog
Sure, I'll take a scan of the pages tomorrow.

Re: TRD Multi-ECU programming software floppies

Posted: Mon Feb 25, 2019 2:03 am
by Davegt27
Interesting

Can you give the floppies To one of those companies that recover data?

Re: TRD Multi-ECU programming software floppies

Posted: Wed Aug 21, 2019 11:04 pm
by Toyoloog
Tried that but they don't accept floppies any longer over here. Even with my kryoflux it did not work, seems the magnetic medium is coming off and ruined both floppies unfortunately. My only hope is that Toyota / TRD might have a backup available somewhere. At least I now got a NEC PC95 to run the software on :D