WANTED: 4AG clear cam gear cover
WANTED: 4AG clear cam gear cover
Hi, Looking for a clear cam gear cover for my FX-16. Thanks. sm_ewr@hotmail.com
Re: WANTED: 4AG clear cam gear cover
Here you go: http://zakleecorp.com/
Coffee is what makes civilized life possible in these demanding times...
Re: WANTED: 4AG clear cam gear cover
Anybody got a used Zaklee sideways engine version laying around ?
Re: WANTED: 4AG clear cam gear cover
You could possibly trim it if you're careful enough.
- Rogue-AE95
- Club4AG Expert
- Posts: 493
- Joined: Thu Jan 10, 2013 4:03 pm
- Location: Tampa Bay, FL
Re: WANTED: 4AG clear cam gear cover
ritz wrote:You could possibly trim it if you're careful enough.
They do make one for the MR2 with the cut-out for the side mount. I don't think there's a cover with a hole for that extra stiffener piece the FWD Corollas have, though.
'88 Corolla All-Trac x2 (manual, auto)
-
- Posts: 1
- Joined: Thu Nov 19, 2015 4:50 pm
Re: WANTED: 4AG clear cam gear cover
Hi, All -
We at Zaklee Corp. aren't big fans of cutting out a RWD clear cam gear cover to make the FWD, or transverse mount clear cam gear cover, especially when we made the tranverse, FWD/MR2 model exactly for this purpose! See it below and here: http://www.ZakleeCorp.com.
Thanks!
- Rob
We at Zaklee Corp. aren't big fans of cutting out a RWD clear cam gear cover to make the FWD, or transverse mount clear cam gear cover, especially when we made the tranverse, FWD/MR2 model exactly for this purpose! See it below and here: http://www.ZakleeCorp.com.
Thanks!
- Rob
- Attachments
-
- 4AG MR2 Pic small.jpg (129.8 KiB) Viewed 6328 times
Re: WANTED: 4AG clear cam gear cover
Hi, I'm still looking for a decent used clear cam cover for my vintage 4AG AE-82, wrong-way mounted FX-16 engine. Thanks !
Re: WANTED: 4AG clear cam gear cover
Anybody have a dead 4AG (AE82) (even an MR2) with a clear cam gear cover on it, and want to part with the clear cover ?