Wtb: big port cylinder head

[ae86_dreamer]

I'm looking for a big port cylinder head with everything in it. it would be nice if I can get a rebuild one already. Thanks

[oldeskewltoy]

I'm looking for a big port cylinder head with everything in it. it would be nice if I can get a rebuild one already. Thanks

What is your budget??

[ae86_dreamer]

for the rebuilt? right around 700?

[oldeskewltoy]

for the rebuilt? right around 700?

$700 is fair for a plain rebuild as long as no serious machine work is required.

I do cylinder head porting - viewtopic.php?f=22&t=300 For about $1100 (you supply head) I can return a ported and polished largeport head.

[ae86_dreamer]

What's your location?

[oldeskewltoy]

What's your location?

Portland Oregon 97219.... shipping in the USA typically runs about $60 to me, and $80 out (do to high insurance value). I do have cylinder heads I can begin from, they would add $200 with no core, or $100 with your head as a core.

[Illegal_Garage]

head rebuild job at my local machine shop is $160

Max

[oldeskewltoy]

head rebuild job at my local machine shop is $160

Max

max... that's pretty darn good... what all do you get for $160??

typically around here** at least $160 only covers the cost to clean the head, pressure check it, and machine the surface to flat. What do they do about valve seals, valve springs, not to mention valve to seat finish?

** - http://www.portlandenginerebuilders.com ... -10-13.xls

[Illegal_Garage]

Cleaned, decked, inspect guides, valves cut, seats cut, new seals, and assembled

Max