RWD 4age exhaust manifold required (LOCATED IN THE UK)
RWD 4age exhaust manifold required (LOCATED IN THE UK)
Looking for a RWD exhaust manifold, after market preferred, not much choice here in the UK without being mega expensive.
-
- Club4AG Expert
- Posts: 345
- Joined: Thu Jun 20, 2013 4:08 am
Re: RWD 4age exhaust manifold required (LOCATED IN THE UK)
Can you fit one off of the MR2?
Re: RWD 4age exhaust manifold required (LOCATED IN THE UK)
Not really as it's still a FWD set up although the engine and gearbox are in the middle of the car.
Need the manifold to exit along the side of the block, not down and under.
Need the manifold to exit along the side of the block, not down and under.
-
- Club4AG Enthusiast
- Posts: 131
- Joined: Fri Jun 07, 2013 12:20 pm
Re: RWD 4age exhaust manifold required (LOCATED IN THE UK)
Im surprised you can't find this part at a decent price in the UK...I know 4age powered Lotus 7(or similar replicas) are very popular out there, have you tried looking in a lotus 7 shop...good luck
-
- Club4AG Expert
- Posts: 345
- Joined: Thu Jun 20, 2013 4:08 am
Re: RWD 4age exhaust manifold required (LOCATED IN THE UK)
There is nothing in the UK in terms of manifolds for the MR2 or Corolla.
There are a few companies who will make you a manifold.
http://www.jpexhausts.co.uk/
There are a few companies who will make you a manifold.
http://www.jpexhausts.co.uk/
-
- Club4AG Expert
- Posts: 423
- Joined: Thu Jan 10, 2013 10:08 pm
- Location: SF
Re: RWD 4age exhaust manifold required (LOCATED IN THE UK)
Unless you're spending quite a bit your best bet would be either Janspeed or Ashley. Outside of that you would have the usual eBay chinese ones which aren't really any better or worse.
-
- Club4AG Expert
- Posts: 345
- Joined: Thu Jun 20, 2013 4:08 am
Re: RWD 4age exhaust manifold required (LOCATED IN THE UK)
Janspeed don't make one for the AW11
Haven't heard of Ashley for it either.
Best bet is a custom made and it'll probably cost less than trying to import one.
Haven't heard of Ashley for it either.
Best bet is a custom made and it'll probably cost less than trying to import one.
RWD 4age exhaust manifold required (LOCATED IN THE UK)
Found a guy who sells/makes them, so I bought one. Turned up today, very pleased.
-
- Club4AG Expert
- Posts: 345
- Joined: Thu Jun 20, 2013 4:08 am
Re: RWD 4age exhaust manifold required (LOCATED IN THE UK)
Who was that?
Can they make them for the AW11?
Can they make them for the AW11?
Re: RWD 4age exhaust manifold required (LOCATED IN THE UK)
I'm going to have one available soon hopefully. Placing an order for a new one now. My old one fits for a 16 or 20v and was handmade by a small shop in Japan.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
my diary/build: http://club4ag.com/forums/viewtopic.php?f=7&t=10479
Re: RWD 4age exhaust manifold required (LOCATED IN THE UK)
PDB if your still looking for one, shoot me a Text 07477343321
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
my diary/build: http://club4ag.com/forums/viewtopic.php?f=7&t=10479
Re: RWD 4age exhaust manifold required (LOCATED IN THE UK)
JyuRoku wrote:PDB if your still looking for one, shoot me a Text 07477343321
Sent from my iPhone using Tapatalk
Thanks but I've got one now, pop it up in the classifieds I'm sure it will sell quickly.
Re: RWD 4age exhaust manifold required (LOCATED IN THE UK)
I'll wait as I have yet to receive my PowerCraft header
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
my diary/build: http://club4ag.com/forums/viewtopic.php?f=7&t=10479