15" custom offset wheels NOW available for order.

[ITSLA]

Sorry about the wait time on the info and availability on these wheels, but the are finally available for order.

Built time is 6-8 wks from date of placed order.

Two series available at this time with more styles on there way.

MSR 228 and 229 (2 piece wheels)
Available colors: Grey, Gold, Blue, Green faces. All have polished front and rear lip.
bolt patterns for order. 4x100 or 4x4.5
Custom Offset available by increments of 5mm until inner hoop allows.
Here is a sample picture with some measurements that people have been asking about.

Pricing is as follows:
15x7 with custom offset. $195each +tax & shipping
15x8 with custom offset. $205each +tax & shipping
15x9 with custom offset. $215each+tax & shipping

Specs (off 15x9)
Smallest portion of the inner hoop where face is welded on is 13.5"
Largest portion of the inner hoop is 14.5"
(in this case) width 9"

Thank you for your time and patience!

Alex
A&M Tires
9837 Highway 120
Oakdale, ca 95361
209.847.9500
mon-fri 8-5:30
Sat 8-3





MSR 228








MSR229


Again, Thank you for your time and your patience!

[CoKoBeans]

How much do these weigh?

[Joe4ag]

I think in the online store said 15 lbs and made in usa.

[sean1978]

This looks like a great product, I'd really like to see some more original center sections. Some things with angular lines or geometric shapes inspired by vintage Japanese wheels would be awesome.

[ITSLA]

Please Any questions or for ordering, e-mail me at amtires@att.net
Thank you!

[xb_release_2]

Very nice looking wheels and your own offset's differ will differ from the guy down the road

[ITSLA]

MSR229 IN STOCK "READY FOR SHIPPING"
4X4.5 - (4X114.5)
15X9 +15 SILVER FACE WITH INNER AND OUTER POLISHED LIP (APPROX 3.5" LIP
FOR $680 (+SHIPPING AND TAX)
E-MAIL ME IF INTERESTED!
AMTIRES@ATT.NET

THANK YOU!
ALEX
A&M TIRES
9837 HIGHWAY 120
OAKDALE, CA 95361
209.847.9500

[Garage7RP]

Nice wheels! Are negative offsets possible?

[daveskatesallday]

I was wondering when these would pop up again i remember looking at them before the old site went down !

[boomstik01]

Custom Offset available by increments of 5mm until inner hoop allows.

Just to be clear on this,does this means that the center/face of the wheel would be the one moved in or out and not just a different thickness on the mounting pad to move the wheel in or out correct? also its been awhile since anyone posted on this thread, are the custom prices still valid? do you offer local pickup?

thanks,
ben