Hi Max, after a very long time I think it's finally time to get that one piece driveshaft. I'm using a
W58 transmission on my AE86. So the measurement from the differential pinion flange to the W58
output shaft is approximately 50.2 in. I remember you asked me for two measurements, one
measurement is with the vehicle jacked up with the rear suspension/differential hanging and the
other measurement is with the AE86 standing on the ground. The thing is, I have coilovers in the
front and in the back. The differential/suspension doesn't hangs even when the rear has been
suspended with jack stands on the chassis (jack stands not placed on the differential). The
coilovers are height adjustable.