F/S SSR Watanabe RS-8 15x6.5 +34

[1st_gen7]

- SSR Watanabe RS-8 rims:
- Watanabe made the centers and Speed Star made the barrels.
- Gunmetal with Polished Lips
- 15x6.5
- +34 offset
- 4x114.3
- 2 piece rims
- Wheels and tires are in good condition, no major curb rash.
- Bolt on and go!
- Asking $750 (plus shipping) or reasonable best offer
- Local pickup preferred, located in LA area, socal

text 818-497-3805

[Nismou20]

Your pics don't seem to reflect polished lips. Do you have a better pic? That would be a plus with polished lips. Thanks,

[1st_gen7]

i see. ill be working on the car tomorrow, ill get a pic for u then and post it ASAP. the lips are fully polished.

[Nismou20]

Please get your facts right. Is this infact 4/114 as 1st gen Rx7 I believe had 4/100 and where is the polished lip? Duhh

[djremy]

1st gens actually can have 4/100 or 4/114 depending on the type of rx7...

[1st_gen7]

84-85 GSL-SE RX-7!!! Not GS, not GSL, GSL-SE. Only North America offered this special model. 50/50 weight distribution. Comes with a fuel injected 13b stock, 4X114.3 bolt pattern, 4 wheel disc brakes, clutch type limited slip differential and an upgraded watts link rear end modified for a lower center of gravity over previous models. I wouldn't go onto an 86 forum with an RX7 handle and not know RX7's, c'mon guise!

Oh and here's a shiny shiny polish pic for those who wanted it, there's a slight patina so ill polish it up even shinier for anyone who buys it.

[1st_gen7]

to the top!

[sirmikef]

I thought first gen gs and gsl rx7 had 4x110 bolt pattern, not 4x100?

[gotzoom?]

Cool and rare wheels. Technically, the model is "RS-Eight." Here's what they look like on an AE86. Mine are 14x6.5, though. The centers tap out fairly easily, so you can repaint them.