20vBT harness & ECU C160 6spd Trans. / AE92 Suspension
Posted: Tue May 26, 2015 1:13 am
GARAGE CLEAN UP
Blacktop 4AGE engine harness. Includes Map Sensor
Looks like o2 sensor plug was cut. Everything else is there.. $OLD
BT 6spd ECU. Selling my spare. $OLD
Purchase Harness & ECU for $OLD
C160 6 speed transmission with axles. I'm assuming it's Non-LSD. ( I'm comparing how the diff looked through the axle hole. I have a LSD one on my AE92 and it looks different) $500
With some modifications, can be used on AW11.
AE92 Corolla GTS Suspension
Used JIC coilovers. No Adj. Dampening.
Previous own welded the colars/ hats to the spring. Spring rate was unknown but stiff. Probably blown.
drove on these daily for years.they were stiff and jarring. These are for someone who wants to rebuild them. $OLD
Ground Control kit w/ front stock housings.
SW20 AGX up Front. 300lbs spring
KYB GR2 rear. 250lbs spring
Also with include extra rear pair of struts struts.
(Never got around to switching the rear GR2s with the tokicos)
$OLD
Blacktop 4AGE engine harness. Includes Map Sensor
Looks like o2 sensor plug was cut. Everything else is there.. $OLD
BT 6spd ECU. Selling my spare. $OLD
Purchase Harness & ECU for $OLD
C160 6 speed transmission with axles. I'm assuming it's Non-LSD. ( I'm comparing how the diff looked through the axle hole. I have a LSD one on my AE92 and it looks different) $500
With some modifications, can be used on AW11.
AE92 Corolla GTS Suspension
Used JIC coilovers. No Adj. Dampening.
Previous own welded the colars/ hats to the spring. Spring rate was unknown but stiff. Probably blown.
drove on these daily for years.they were stiff and jarring. These are for someone who wants to rebuild them. $OLD
Ground Control kit w/ front stock housings.
SW20 AGX up Front. 300lbs spring
KYB GR2 rear. 250lbs spring
Also with include extra rear pair of struts struts.
(Never got around to switching the rear GR2s with the tokicos)
$OLD