Billy_Andrea wrote:Guys,
I need reailstic numbers for this before going any further......
Billy.
This is the new style... correct?
Billy_Andrea wrote:Guys,
I need reailstic numbers for this before going any further......
Billy.
Billy_Andrea wrote:Guys,
This is now moving along pretty fast so before I potentially waste any more of the time of everyone I'm dealing with I need to firm up how many people are in.
Hasselgren is in for 5 which means we need 15 more people to make this happen.
I am ready to send out the later style 014 cover for 3D CAD modeling. This will be coming at alot of expense to me so I need to make sure it's viable. If it works out, I will then start on the early 008 style cover. I want to do one at a time because the reverse engineering scanning is coming in at approx. $1,980 +/- 10% per item scanned.
I also have the CNC mill standing by, waiting to start once the drawings are done.
I need reailstic numbers for this before going any further......
Billy.
oldeskewltoy wrote:Billy...
I MIGHT be able to supply you with an early one when it comes time.... L has one magnesium one, but it can't be used because it is damaged... but it likely can be used as a basis for scanning
ritz wrote:Sorry if this is a repost
what is required to fit these on an AE86 4AG 16v bluetop?
What plug wires would you use?