This post is for a 4age race long block. Race ECU and wire harness.

what you get is the following:
Haltech Ecu (Sprint 500)
Wiring harness
20v blacktop head hand ported (smoothed casting and rough edges)
TRD valve springs
TODA 304 cams with 9mm lift exh. and int.(one cam might need work)
Cometic metal 1mm head gasket
LOTS OF VALVE SHIMS to get the cams to the toda spec lash
20v blacktop block with new bearings on everything
True 11.1 Arias pistons 81.5mm (puts total compression around 13.1ish)
Crower I Beam rods (really light)

I really wanted to run this in my street car, I still might but it be much better for a track car. Ive never had this motor in my car, I bought it from a gentlemen in Texas and it has been sitting in my garage. I would like to sell it as a package and am not really interested in parting it out. That being said I'm looking for $3000 obo takes all. This is a great deal. Feel free to contact me by phone at (916) 897-4416 with any further questions.

I can send pics via text or email to interested parties.

Thanks for looking.

where are you located?

How much for the valves, if you are willing to part?

Located in northern california.

Sorry i do not want to part out as of yet.