Page 1 of 1
7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Thu Oct 17, 2013 3:14 pm
by Chubi
Located at work in Fullerton, can meet u somewhere in between there and Torrance where i live.
$120 OBO
4AGE Rods. 42mm/20mm ends - $OLD
SC14 Supercharger off a previa- $OLD
Re: 7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Mon Oct 21, 2013 5:07 pm
by Chubi
bumppppp
Re: 7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Mon Oct 28, 2013 3:54 pm
by Chubi
up up upppp
Re: 7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Sat Nov 02, 2013 6:29 pm
by Chubi
to the topppppp
Re: 7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Tue Nov 05, 2013 1:47 pm
by phanist
is this 7rib block the same as the 20v BT block?
Re: 7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Thu Nov 07, 2013 9:37 am
by ga_goosh
Chubi,
what condition is the crank? was there any spun bearings? and will you sell just the crank?
phanist wrote:is this 7rib block the same as the 20v BT block?
this block is a 16v block the 20v blocks have the cut out like the 4af blocks but you can build a 20v with this block. you will just need a 16v pan.
Re: 7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Fri Nov 08, 2013 5:22 pm
by Chubi
ga_goosh wrote:Chubi,
what condition is the crank? was there any spun bearings? and will you sell just the crank?
phanist wrote:is this 7rib block the same as the 20v BT block?
this block is a 16v block the 20v blocks have the cut out like the 4af blocks but you can build a 20v with this block. you will just need a 16v pan.
the crank is in good, useable condition, crank spins no problems, bearings are not spun but i recommend replacing them haha
Re: 7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Sat Nov 09, 2013 4:03 pm
by phanist
phanist wrote:
is this 7rib block the same as the 20v BT block?
this block is a 16v block the 20v blocks have the cut out like the 4af blocks but you can build a 20v with this block. you will just need a 16v pan.
u mean if some one have a 20v head they can use this block and make a full 20v?
Re: 7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Sun Nov 17, 2013 10:46 pm
by Chubi
bumppp
Re: 7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Fri Nov 22, 2013 6:53 am
by sgonzalez
Chubi wrote:bumppp
Hello Pal Interested on the Rods I sent you an IM
Re: 7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Sat Nov 23, 2013 1:31 am
by Chubi
sgonzalez wrote:Chubi wrote:bumppp
Hello Pal Interested on the Rods I sent you an IM
got no pm...
pm'd u lol
Re: 7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Mon Nov 25, 2013 2:31 pm
by Chubi
SC14 Sold bump
Re: 7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Fri Dec 06, 2013 4:47 pm
by Chubi
bump it uppppp
Re: 7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Sat Dec 21, 2013 12:21 am
by comhosa
check your pm
Re: 7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Sat Jan 04, 2014 11:10 am
by Chubi
Rods sold, bump upp
Re: 7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Sun Jan 05, 2014 5:37 pm
by tmburt
How much for the block and crank shipped to Louisville, KY USA?
Re: 7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Mon Feb 10, 2014 7:41 pm
by Chubi
not shipping a block lol, bump
Re: 7 Rib Block + Crank, 42/20mm Rods, Previa Supercharger
Posted: Thu Feb 20, 2014 6:00 pm
by 83norcarolla
yo im down to pick up the block- text me 818 ninenine3 two6seven3 ---ray