4AGE HiComp Smallsport

User avatar
XII
Club4AG Regular
Posts: 30
Joined: Thu Jan 10, 2013 8:54 pm
Location: Winston-Salem NC

4AGE HiComp Smallsport

Postby XII » Thu Sep 19, 2013 12:36 pm

EDIT: Thinking about selling without letting go of the chassis, thinking about a 20v. If I do I'd need to keep transmission obviously.


I have a very fresh Smallport motor with about 5000 miles on it as of writing, fully broken in. This is a 7rib block with oil squirters.

Includes transmission with newish synchros on 1-3 as well as a rebuilt shifter.
Exedy sprung 3 puck stage 2 clutch
TODA Chromoly flywheel

Factory size pistons and rods
Was rebuilt with a new crank that was balanced at 9000 rpm
Head was cleaned out and valves reseated, new springs
New oil pump, water pump
All arp hardware
not sure of exact numbers, but head and block were skimed and with the TODA tls .6mm headgasket it's running at 12.2:1 compression
Largeport cams
Just did a valve shim adjustment a few days ago
Using TVIS manifold with T3 Largeport-Smallport adaptor plate.
OBX header that was cut at the flange, not welded to anything.
Full uncut harness with bluetop ECU
Ignition included

I have a 2.5 inch under axle exhaust on the car made with an 18 inch vibrant resonator and vibrant streetpower muffler. Sounds pretty good imho.

I'm probably forgetting a couple things.
PM offers, questions, or if information isn't clear.
Pick up only: Location - North Carolina Triad

Image

Image
Last edited by XII on Sat Feb 01, 2014 7:35 pm, edited 2 times in total.
2KAWAII 2LIVE 2SUGOI 2DIE

(ღ˘⌣˘ღ) ♫・* ┐(๑◕ˇڡˇ◕)┌ 「ÅNIMÉS」 ╰( ´◔ ω ◔ `)╯ /人◕ ‿‿ ◕人\

pachimon
Club4AG Enthusiast
Posts: 70
Joined: Tue Jan 15, 2013 8:30 am
Location: Fresno, CA

Re: 4AGE HiComp Smallsport

Postby pachimon » Fri Sep 20, 2013 8:23 pm

I'm interested, but have NO clue what to offer. anyone have an idea what this should sell for?

User avatar
XII
Club4AG Regular
Posts: 30
Joined: Thu Jan 10, 2013 8:54 pm
Location: Winston-Salem NC

Re: 4AGE HiComp Smallsport

Postby XII » Fri Sep 20, 2013 9:01 pm

Honestly I'd like to know what the general consensus is too, I honestly don't want to sell for too much or too little if I do end up selling the chassis away from the drivetrain.
2KAWAII 2LIVE 2SUGOI 2DIE

(ღ˘⌣˘ღ) ♫・* ┐(๑◕ˇڡˇ◕)┌ 「ÅNIMÉS」 ╰( ´◔ ω ◔ `)╯ /人◕ ‿‿ ◕人\

pachimon
Club4AG Enthusiast
Posts: 70
Joined: Tue Jan 15, 2013 8:30 am
Location: Fresno, CA

Re: 4AGE HiComp Smallsport

Postby pachimon » Fri Sep 20, 2013 9:19 pm

what did ya spend? or are you like me: you don't count so you don't feel depressed? LOL

pachimon
Club4AG Enthusiast
Posts: 70
Joined: Tue Jan 15, 2013 8:30 am
Location: Fresno, CA

Re: 4AGE HiComp Smallsport

Postby pachimon » Fri Sep 20, 2013 9:21 pm

and would running a thicker headgasket to lower compression cause an issue with any other part of the engine?

User avatar
XII
Club4AG Regular
Posts: 30
Joined: Thu Jan 10, 2013 8:54 pm
Location: Winston-Salem NC

Re: 4AGE HiComp Smallsport

Postby XII » Sat Sep 21, 2013 2:37 pm

I've spent about $2k on it, I try not to feel depressed but I have to keep track of these things lol.

I can't see why a thicker headgasket would cause any problems.
2KAWAII 2LIVE 2SUGOI 2DIE

(ღ˘⌣˘ღ) ♫・* ┐(๑◕ˇڡˇ◕)┌ 「ÅNIMÉS」 ╰( ´◔ ω ◔ `)╯ /人◕ ‿‿ ◕人\

pachimon
Club4AG Enthusiast
Posts: 70
Joined: Tue Jan 15, 2013 8:30 am
Location: Fresno, CA

Re: 4AGE HiComp Smallsport

Postby pachimon » Sat Sep 21, 2013 3:09 pm

this would definitely be overkill and out of my price range, for my project, then.

glws, dude! sweet setup.

User avatar
XII
Club4AG Regular
Posts: 30
Joined: Thu Jan 10, 2013 8:54 pm
Location: Winston-Salem NC

Re: 4AGE HiComp Smallsport

Postby XII » Mon Sep 23, 2013 6:07 pm

Well of course I wouldn't be able to sell it for that much, that's overkill regardless. I was thinking maybe $1700 but like I said I'm just not sure. ---It depends on if the chassis sells separate anyway.---

decided I may sell without lettitng go of chassis
Last edited by XII on Sat Feb 01, 2014 7:31 pm, edited 2 times in total.
2KAWAII 2LIVE 2SUGOI 2DIE

(ღ˘⌣˘ღ) ♫・* ┐(๑◕ˇڡˇ◕)┌ 「ÅNIMÉS」 ╰( ´◔ ω ◔ `)╯ /人◕ ‿‿ ◕人\

User avatar
XII
Club4AG Regular
Posts: 30
Joined: Thu Jan 10, 2013 8:54 pm
Location: Winston-Salem NC

Re: 4AGE HiComp Smallsport

Postby XII » Fri Oct 04, 2013 2:49 am

bump
2KAWAII 2LIVE 2SUGOI 2DIE

(ღ˘⌣˘ღ) ♫・* ┐(๑◕ˇڡˇ◕)┌ 「ÅNIMÉS」 ╰( ´◔ ω ◔ `)╯ /人◕ ‿‿ ◕人\

User avatar
XII
Club4AG Regular
Posts: 30
Joined: Thu Jan 10, 2013 8:54 pm
Location: Winston-Salem NC

Re: 4AGE HiComp Smallsport

Postby XII » Sat Nov 09, 2013 6:04 pm

ttt
2KAWAII 2LIVE 2SUGOI 2DIE

(ღ˘⌣˘ღ) ♫・* ┐(๑◕ˇڡˇ◕)┌ 「ÅNIMÉS」 ╰( ´◔ ω ◔ `)╯ /人◕ ‿‿ ◕人\

GtsIan
Club4AG Regular
Posts: 11
Joined: Wed Jan 09, 2013 4:05 pm

Re: 4AGE HiComp Smallsport

Postby GtsIan » Sat Nov 09, 2013 8:00 pm

i would be interest in the setup if you sell the chassis

DrAE86Toreno
Club4AG Enthusiast
Posts: 141
Joined: Thu Jan 10, 2013 10:37 pm

Re: 4AGE HiComp Smallsport

Postby DrAE86Toreno » Mon Dec 02, 2013 6:19 pm

Still available? Willing to ship to socal.?

User avatar
XII
Club4AG Regular
Posts: 30
Joined: Thu Jan 10, 2013 8:54 pm
Location: Winston-Salem NC

Re: 4AGE HiComp Smallsport

Postby XII » Tue Dec 03, 2013 7:37 am

No sorry I don't like the idea of shipping something this big.
2KAWAII 2LIVE 2SUGOI 2DIE

(ღ˘⌣˘ღ) ♫・* ┐(๑◕ˇڡˇ◕)┌ 「ÅNIMÉS」 ╰( ´◔ ω ◔ `)╯ /人◕ ‿‿ ◕人\

DrAE86Toreno
Club4AG Enthusiast
Posts: 141
Joined: Thu Jan 10, 2013 10:37 pm

Re: 4AGE HiComp Smallsport

Postby DrAE86Toreno » Sat Dec 07, 2013 10:23 pm

Damn..alright...when and if you are ready let me know I'm interested

Reuterskiold
Club4AG Enthusiast
Posts: 55
Joined: Mon Jan 21, 2013 6:48 am

Re: 4AGE HiComp Smallsport

Postby Reuterskiold » Thu Jan 30, 2014 9:02 am

this is very tempting :/

User avatar
XII
Club4AG Regular
Posts: 30
Joined: Thu Jan 10, 2013 8:54 pm
Location: Winston-Salem NC

Re: 4AGE HiComp Smallsport

Postby XII » Sat Feb 01, 2014 7:36 pm

update
2KAWAII 2LIVE 2SUGOI 2DIE

(ღ˘⌣˘ღ) ♫・* ┐(๑◕ˇڡˇ◕)┌ 「ÅNIMÉS」 ╰( ´◔ ω ◔ `)╯ /人◕ ‿‿ ◕人\

tlakey
Club4AG Regular
Posts: 14
Joined: Mon Feb 17, 2014 5:04 pm

Re: 4AGE HiComp Smallsport

Postby tlakey » Mon Feb 17, 2014 5:10 pm

XII you are located in winston salem correct? is this still available and what would you be willing to let it go for . Please pm me, I am in Greensboro and would love to talk numbers with you! I am very interested and am looking to start a project aside from my AE92 Corolla GTS Coupe I have as a daily!


Return to “4A-GE Engine Parts”

Who is online

Users browsing this forum: No registered users and 16 guests