Hello,

I have loads of brandnew oem 4AGE 16V or 20V or 4AGZE engine parts (no used parts).

Email me with a part number and i'll give you a price.

Take in mind in live in holland, so insured shipping (Worldwide) till about 2 kg's will cost around $35

UP!

Listing parts will definetly help ur sale cause we don't know what u have.

Thanks and have a nice day

I have pistons, rings, bearings, headgaskets, oil pumps, water pumps (OEM and GMB), ignition wires (OEM and other brand). You name it, i most probably have it

Do you have any of those 10.1:1 Euro spec TVIS pistons? 18mm wrist pin? (Not to be confused with the 10.3:1 smallport pistons.)

http://forums.club4ag.com/zerothread?id=107132

Do you happen to know what part number the piston should be?

I'm not sure if this is the right one for an 18mm wrist pin, but the part number for the .5mm oversized set is:

13103-16030

http://forums.club4ag.com/zerothread?id=7282

Don't know if the rings are the same as USDM bigport or not. Part numbers are different but who knows...

I can get the pistons with number 13103-16030. Only a few are available and they cost $335 ex shipping.

With the rings with number 13013‑16180 it'll cost $485

I don't have a part number, but I have a part diagram that I circled the part I need on. I need the throttle link bracket and the link rod for a 20v Blacktop circled in the picture.
http://imgur.com/mAj6XGG

Checked toyodiy over and over again and can't find the part numbers either. I need them to check if i can order them.

Don't happen to have a 16v crank pulley do you?

Cam cover gasket?

Dizzy Cap & Rotor?

Can order all. I think i might even have a 16v crank pulley.

If you need the parts please send me a pm

do you have 20v silvertop fuel injectors?

I have 2 sets of blacktop injectors. Don't know the condition while i bought them as a spare and never used them. Will sell for €35 a set plus whatever shipping will cost.