I purchased this turbo setup with intentions of rebuilding the engine and turbo once I got out of the Army And now time to sale for a better investment. Everything is here for a complete build except for the oil pan that I sold with my stock engine last week. Selling all to Fund a Caldina Swap! I would like to sale everything as a complete set that totals at $1555 but Im will to sale Everything for $1300. I have up close and detailed picture’s .. Just ask
I WANT TO SALE AS A WHOLE And DELIVERY DEPENDING ON DISTANCE, ALL SALE ARE FINAL.
Located in Duluth ,GA 30096.
Asking price: $1,555 OBO
Includes:
Engine: Recommend machine shop rebuild ($400)
4agze engine,7 Rib Block,Oil filter Adapter, Rods,Pistons(two need to be replaced) Crank Shaft, Big Port Head(Still assembled w/ valve covers and timing gears and new belt& Thermostat housing and sensors, Toyota Oil Cap.)
CT26 Turbo ($100) (Turbo has a little play in the shaft roughly 30,000 miles, hense low price)
Stock Fuel Rail ($50)
4 x Toyota 440cc injectors (cleaned by witch hunter performance) ($150)
Mega Squirt: (Custom built plug and play harness
PNP wiring harnesses, USB adapter and MS tuning cable, MS1 V2.2, TVIS control)
($150)
Stock Engine Harness ($100)
Stock Ecu (If Needed) ($75)
Distributor & Wires ($50)
Exhaust Manifold ($75)
EGR block off plate ($10)
EGR and Vacuum lines ($30)
T-clamps ($25)
Silicon Couplers ($25)
Upper portion of the down pipe ($30)
Big port Intake Manifold ($50)
Stock Throttle Body ($30)
Stock AFM ($25)
Charge pipes ($30)
Blue JDM SPORT Cone Filter ($20)
HKS SQV BOV ($100)
Oil feed line & Adapter ($20)
Air 2 Water Intercooler ($100)
Intercooler pump ($30)
Intercooler reservoir ($75)
Uploaded with ImageShack.us
FS: Turbo Setup
-
- Club4AG Regular
- Posts: 25
- Joined: Thu Jan 10, 2013 10:36 pm
Re: FS: Turbo Setup
so as of now your selling everything as a whole? im interested in the megasquirt and the intercooler pump.
-
- Posts: 8
- Joined: Sun Jun 30, 2013 12:24 am
Re: FS: Turbo Setup
YEs everything as a whole.
-
- Club4AG Enthusiast
- Posts: 132
- Joined: Wed Jan 09, 2013 4:02 pm
Re: FS: Turbo Setup
I'm interested in the oil feed setup and a few other things as well if you decide to split it up.
-
- Posts: 8
- Joined: Sun Jun 30, 2013 12:24 am
Re: FS: Turbo Setup
alabamaguy wrote:I'm interested in the oil feed setup and a few other things as well if you decide to split it up.
Ok, I'll let you know if i decide to go that route thank you for your interest.
Re: FS: Turbo Setup
whats location?
-
- Posts: 8
- Joined: Sun Jun 30, 2013 12:24 am
Re: FS: Turbo Setup
kadiechie wrote:whats location?
IM located in the state of GA.
-
- Club4AG Regular
- Posts: 24
- Joined: Sat Apr 13, 2013 9:47 am
Re: FS: Turbo Setup
ill buy that megasquirt off you, if you decide to part out. prob the turbo and manifold too :O
text me at 256-374-4865
text me at 256-374-4865
-
- Club4AG Enthusiast
- Posts: 132
- Joined: Wed Jan 09, 2013 4:02 pm
Re: FS: Turbo Setup
I need the stock ecu, harness, and egr plate pretty badly.
256-473-5eight4five
256-473-5eight4five
-
- Posts: 8
- Joined: Sun Jun 30, 2013 12:24 am
Re: FS: Turbo Setup
Yes, the setup is still available.
-
- Posts: 8
- Joined: Sun Jun 30, 2013 12:24 am
Re: FS: Turbo Setup
What do you have to offer?
Re: FS: Turbo Setup
Ive got a set of porsche d90 rims. They're powdercoated white and come with 4 falken tires with 90% tread (mounted). and 3 Bfgoodrich tires with 75% (laying around).