FWD 4age manifolds & accessories

[hachigo87]

Tore down a spare block I had mainly to rob the head off of it for my car so here's some things I don't have any use for. All of these came off of a 3 rib out of an 85 MR2.
Prices do not include shipping, if you're interested in something respond in the thread or PM me and I can get you a shipping quote to your zip code.



FWD intake manifold - $50


A/C bracket & pulley (spins freely, just rusty from sitting) - $30


Random box of TVIS plate, MR2 hard vacuum lines, EGR, fuel line & fuel rail, etc - Inquire within

Also have a FWD exhaust manifold that I have no use for as well, make an offer and I'll get you a shipping quote!

[Pogipoints619]

Was wondering would you happen to have the thermostat housing for a fwd setup. Let me know

[hachigo87]

Was wondering would you happen to have the thermostat housing for a fwd setup. Let me know

I'm pretty sure I do, I'll take a look after work tomorrow and let you know!

[Pogipoints619]

Let me know how much shipped to the 92114 area and if you could post a pic to make sure its the correct housing I need.

[hachigo87]

This is everything that was in the box, so if you don't see it I probably don't have it :/

[hachigo87]

Let me know how much shipped to the 92114 area and if you could post a pic to make sure its the correct housing I need.

Just posted the rest of the parts I had from that block above, don't think I have the thermostat housing, sorry!

[chickennugget]

pogipoints619 i sent you a PM, i have one.

[hachigo87]

Bump! Still have all of this if anyone is in the market

[vangman209]

by any chance do you have a disturber for sale ?

[hachigo87]

by any chance do you have a disturber for sale ?

Nope, sorry just what's listed for right now until I do some more digging around and see what else I have but I know I don't have a spare one of those for sale.

[hachigo87]

Bump! Still have everything above.

[chickennugget]

does that manifold have a tps you would be willing to part from it?

[hachigo87]

does that manifold have a tps you would be willing to part from it?

I'm not sure if it does, I'll have to go up and check for you, but if it does I'd be willing to part with it.

[kiwi]

Just an off chance, would you happen to have the bolt that secures the fuel line to the fuel rail, and the return line off the rail to the gas tank?

Cheers,

Mike

[chickennugget]

ok. thanks. heres my email. errincooke@yahoo.com ill check this thread for a reply but email goes to my phone.

[hachigo87]

Just an off chance, would you happen to have the bolt that secures the fuel line to the fuel rail, and the return line off the rail to the gas tank?

Cheers,

Mike

I may have the bolt to the fuel rail but I do not have the return line.

ok. thanks. heres my email. errincooke@yahoo.com ill check this thread for a reply but email goes to my phone.

Unfortunately I was not able to take a look and I will be leaving town tomorrow, getting back Saturday night. I'll look this weekend and email you as soon as I know for sure

[chickennugget]

i found a tps locally.

[hachigo87]

EGR tube that connects to the exhaust manifold is pending, everything else still available!

[GP8]

do you still have a FWD crank pulley?

[hachigo87]

do you still have a FWD crank pulley?

Nope, sorry.. that went with the bottom end when it was sold.

[sirdeuce]

Hachigo87. I don't like to highjack someone elses post, but if they don't have what you are looking for............... PMed you.

[hachigo87]

Still have everything listed here but the fuel rail is pending sale and I just realized that the exhaust manifold has a crack on runner #4 so it'll probably end up in the scrap pile.

[geezer.nelson]

I can use the a/c bracket, and maybe some other small items. PM me please. I'm new to the forum and can't send PMs.

[geezer.nelson]

I also can't reply to PMs. Email me at geezer.nelson@gmail.com I'll fill you in on my project and what parts I need.
It is frustrating to be a newbie. Sorry you have to work around the problem.

[hachigo87]

I also can't reply to PMs. Email me at geezer.nelson@gmail.com I'll fill you in on my project and what parts I need.
It is frustrating to be a newbie. Sorry you have to work around the problem.

Just sent an email your way.

[4ag86mr2]

Pic of exhaust mani?

[hachigo87]

Pic of exhaust mani?

had a decent crack on runner #2 I believe. I either scrapped it or am going to.

[typexd]

a/c bracket sold? if not how much shipped to 98366?

[hachigo87]

a/c bracket sold? if not how much shipped to 98366?

Sent you a PM.