These parts are from a Silvertop race engine that I am parting out. For pictures or questions, please E-Mail me at jetski983@aol.com.

Intake manifold - complete except for injectors and fuel pressure regulator. Comes with a stainless overbraid fuel supply hose with AN fittings - $50
Aluminum fabricated airbox with 4 welded in velocity stacks - $50
Alternator - $35
Starter - $35
Coil pack and Igniter - $45
Techno Toy (www.technotoytuning.com) billett aluminum single row crankshaft pulley and water pump underdrive pulley - $115 for the pair
Distributer (no cap) - $45
Oil Cooler Set-up - Includes the manifold that replaces the OEM Silvertop manifold, oilpan with the return fitting and a small cooler - $60
Short Block + - Block has been cleaned and freeze plugs replaced, deck trued and main bearings align honed. Main and rod bearings and rings were new several races back. ARP main and rod bearing bolts. Pistons coated by Swaintech. Includes water pump and oil pump, rear main seal carrier, oil pick-up and oil pan baffle - $250
C51 5 speed manual transaxle (FWD) - Includes stub axles and clutch slave cylinder - $125

My email program doesn't recognize your address "jetski983@aol.com" could you please verify?

Itb's?

interested in the distributor, alternator, and pulley set. Are you willing to ship if so how much for all shipped to 96738 Hawaii, Big Island

Where are you located?

still got the dizzy?

i tried to email you. i am looking for the intake setup and also the oil cooler setup let me know if these are available and can you send pics to adam_chandran@yahoo.com