Formula Atlantic Race Shop Making Room

Jimmee1990
Club4AG Enthusiast
Posts: 113
Joined: Sun Apr 07, 2013 2:48 am

Re: Formula Atlantic Race Shop Making Room

Postby Jimmee1990 » Tue Aug 13, 2013 4:02 am

I know I'm a little slow, but is there any of the rod sets left? And are they the FA rods to suit 19mm pins or 20mm?

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2060
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Tue Aug 13, 2013 1:03 pm

Jimmee1990 wrote:I know I'm a little slow, but is there any of the rod sets left? And are they the FA rods to suit 19mm pins or 20mm?

i still have rod sets, they are for 19mm pins. $350 per set is exceptionally priced
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

7_sxe10
Club4AG Regular
Posts: 21
Joined: Mon Jun 17, 2013 8:04 pm

Re: Formula Atlantic Race Shop Making Room

Postby 7_sxe10 » Wed Aug 14, 2013 8:23 pm

Do you have exhaust manifold available for sale?

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2060
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Thu Aug 15, 2013 7:42 pm

7_sxe10 wrote:Do you have exhaust manifold available for sale?


like any headers?? None I know of...
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2060
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Thu Aug 22, 2013 10:24 am

bump......

One head pending...........


2 sets of rods sold.......
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

1991ma70
Posts: 6
Joined: Mon Sep 09, 2013 7:00 pm

Re: Formula Atlantic Race Shop Making Room

Postby 1991ma70 » Tue Sep 24, 2013 6:22 am

do you have any rod sets left?

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2060
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Tue Sep 24, 2013 8:24 am

1991ma70 wrote:do you have any rod sets left?


yep... send me an email - oldeskewltoy@yahoo.com
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2060
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Fri Sep 27, 2013 11:02 am

oldeskewltoy wrote:bump......

One head pending...........


2 sets of rods sold.......


Rod Purchaser wrote:Just for your interest, I have resized both ends of the rods and there is heaps of metal around the small end for a 20mm pin and standard 20mm 4A-GE pin bushes if anyone else asks.


So a set of these rods can be modified to accept 20mm wrist pins

I still have rods...

The Atlantic heads... make an offer... :eek: OH... the one on top in the center is sold

Image
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2060
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Thu Oct 24, 2013 3:14 pm

BIG clearance....

ALL used long rod pistons (designed to fit long connecting rods{127.5mm instead of 122mm}) $150 per set of 4. :eek: :eek:

DON'T ask... I don't have ANY long rods.... that is why the CHEAP sale. So if you have a set of long 4AGE rods... I have CHEAP TRD Type pistons available

That is a set of 4 pistons for $150.00
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Brooklandsbob
Posts: 2
Joined: Sat Nov 02, 2013 5:38 pm

Re: Formula Atlantic Race Shop Making Room

Postby Brooklandsbob » Sat Nov 02, 2013 6:53 pm

Do you still have a set of TRD Carillo rods for sale

let me know

thanks

Bob

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2060
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Sun Nov 03, 2013 8:43 am

Brooklandsbob wrote:Do you still have a set of TRD Carillo rods for sale

let me know

thanks

Bob


I have plenty of TRD rods available, $350 per set.... There isn't a Carrillo marking on them....

Image
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Brooklandsbob
Posts: 2
Joined: Sat Nov 02, 2013 5:38 pm

Re: Formula Atlantic Race Shop Making Room

Postby Brooklandsbob » Mon Nov 04, 2013 10:19 am

Any idea of the hours run on any of these, are these usable as is or do they need work before use.

thanks

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2060
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Mon Nov 04, 2013 2:45 pm

Brooklandsbob wrote:Any idea of the hours run on any of these, are these usable as is or do they need work before use.

thanks


The rods vary. Some folks have run then the way they are, others have rebushed them, and one person went and purchased all new L-19 bolts. The bolts they come with are not L19 type, but regular Carrillo type bolts
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

DrAE86Toreno
Club4AG Enthusiast
Posts: 141
Joined: Thu Jan 10, 2013 10:37 pm

Re: Formula Atlantic Race Shop Making Room

Postby DrAE86Toreno » Sun Nov 17, 2013 10:13 pm

Please let me know if you guys ever get anymore valve covers like what you were selling... Janmartin.villanos at yahoo com since i dont always check the forums

sgonzalez
Posts: 3
Joined: Mon Jan 14, 2013 9:43 pm

Re: Formula Atlantic Race Shop Making Room

Postby sgonzalez » Fri Nov 22, 2013 9:02 am

Hello oldeskewltoy

I sent you an Email

Thanks

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2060
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Fri Nov 22, 2013 10:52 am

sgonzalez wrote:Hello oldeskewltoy

I sent you an Email

Thanks


replied.......

Unless things change....... all the carb type intake manifolds are sold.

There is/are an intake manifolds available (about $375) for the largeport - 99003.840. For the smallport 99003.841
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Orange Rocket
Club4AG Expert
Posts: 454
Joined: Mon Jan 14, 2013 9:20 pm

Re: Formula Atlantic Race Shop Making Room

Postby Orange Rocket » Fri Nov 22, 2013 11:06 am

I think I have a set of 5.5mm Long Carrillo rod for the piston you selling.
Stock size is 122mm C to C

The rods I have is 127.5mm C to C.
It is almost brand new!
was $1500 In new.

I am willing to sell it for $800 a set

I can Text you the photo!
Contact me at 310.254.680three.

Image
Last edited by Orange Rocket on Tue Feb 11, 2014 9:42 am, edited 4 times in total.

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2060
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Fri Nov 22, 2013 3:56 pm

Orange Rocket wrote:I think I have a set of 5.5mm Long Carrillo rod for the piston you seeling.
Stock size is 122mm C to C

The rods I have is 127.5mm C to C.
It is almost brand new!
was $1500 In Brand new.

I am willing to sell for $800 a sets

I can Text you the photo!
Contact me at 310.254.680three.



I have pistons that will work both sides of that...(5.461mm, or 5.588mm) Would you like to buy a set... or more if you have more long rod sets? Since my pistons are less costly then your rods... it would make a little more sense for you to put sets together... $150.00 is a GREAT price for 4 pistons.
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Orange Rocket
Club4AG Expert
Posts: 454
Joined: Mon Jan 14, 2013 9:20 pm

Re: Formula Atlantic Race Shop Making Room

Postby Orange Rocket » Fri Nov 22, 2013 7:58 pm

I had 4 sets of this rods, but 3 of them sold to Japan with my 83mm custom piston for 4.5AG and 5.5AG set up.

So only one set left for my future 5.5AG set up.

But I have too many race engine for one race car.

Just want to sell my rods if someone interested at this point.

otherwise keep it and use it with New 83mm custom piston for my 5AG crank

Thanks!

Image



oldeskewltoy wrote:
Orange Rocket wrote:I think I have a set of 5.5mm Long Carrillo rod for the piston you seeling.
Stock size is 122mm C to C

The rods I have is 127.5mm C to C.
It is almost brand new!
was $1500 In Brand new.

I am willing to sell for $800 a sets

I can Text you the photo!
Contact me at 310.254.680three.



I have pistons that will work both sides of that...(5.461mm, or 5.588mm) Would you like to buy a set... or more if you have more long rod sets? Since my pistons are less costly then your rods... it would make a little more sense for you to put sets together... $150.00 is a GREAT price for 4 pistons.

User avatar
speedmaster
Club4AG Expert
Posts: 234
Joined: Tue Jan 22, 2013 9:44 pm
Location: Malaysia and Brunei
Contact:

Re: Formula Atlantic Race Shop Making Room

Postby speedmaster » Wed Mar 26, 2014 4:24 am

can FA head fit in FWD 4age block?

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2060
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Wed Mar 26, 2014 8:24 am

speedmaster wrote:can FA head fit in FWD 4age block?


You mean one of these....

oldeskewltoy wrote:4AG Race Heads - 5 of them! $800-$1400


Full race ported 4AGE heads... these are REAL racing heads ported for producing power in excess of 220hp(the O/S valve heads)



Image

Image

Image

Image





send me an email oldeskewltoy@yahoo.com


They can fit on ANY "A" block.
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

toyproject83
Club4AG Regular
Posts: 10
Joined: Wed Feb 12, 2014 2:00 pm

Re: Formula Atlantic Race Shop Making Room

Postby toyproject83 » Thu Mar 27, 2014 4:27 pm

do you still have the #7 intake for a small port? pls email me at migz299@yahoo.com

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2060
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Thu Mar 27, 2014 6:17 pm

toyproject83 wrote:do you still have the #7 intake for a small port? pls email me at migz299@yahoo.com

sorry... all the DCOE manifolds are sold.
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
speedmaster
Club4AG Expert
Posts: 234
Joined: Tue Jan 22, 2013 9:44 pm
Location: Malaysia and Brunei
Contact:

Re: Formula Atlantic Race Shop Making Room

Postby speedmaster » Fri Mar 28, 2014 9:19 am

ok thats cool knowing it can fir a FWD engine

FrgtnKnt

Re: Formula Atlantic Race Shop Making Room

Postby FrgtnKnt » Fri Mar 28, 2014 10:03 am

Anymore TRD rods left?

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2060
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Fri Mar 28, 2014 4:41 pm

FrgtnKnt wrote:Anymore TRD rods left?


Yep..... :D

email me oldeskewltoy@yahoo.com
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
pauledlinatlantic86
Club4AG Regular
Posts: 16
Joined: Sat Jun 07, 2014 6:40 pm
Location: New Zealand
Contact:

Re: Formula Atlantic Race Shop Making Room

Postby pauledlinatlantic86 » Sat Jun 07, 2014 6:46 pm

hi there. i see this post is old but im after a 16v atlantic cam cover. do you have anymore for sale???????

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2060
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Sun Jun 08, 2014 9:10 am

pauledlinatlantic86 wrote:hi there. i see this post is old but im after a 16v atlantic cam cover. do you have anymore for sale???????


nope... I've had a LOT of people ask...
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
l2dracing
Posts: 1
Joined: Mon Feb 02, 2015 4:18 pm

Re: Formula Atlantic Race Shop Making Room

Postby l2dracing » Mon Feb 02, 2015 4:26 pm

Just curious if you still have a stock of TRD connecting rods, and if you do, are they set up for a 20mm wrist pin?

Orange Rocket
Club4AG Expert
Posts: 454
Joined: Mon Jan 14, 2013 9:20 pm

Re: Formula Atlantic Race Shop Making Room

Postby Orange Rocket » Mon Feb 02, 2015 6:12 pm

l2dracing wrote:Just curious if you still have a stock of TRD connecting rods, and if you do, are they set up for a 20mm wrist pin?



Atlantic use 19mm pin


Return to “4A-GE Engine Parts”

Who is online

Users browsing this forum: No registered users and 6 guests