Part out: Coupe shell, oem cup holder, EDIS coils, doors, weather stripping, ARP, Momo, Nardi

ethergore2
Club4AG Enthusiast
Posts: 137
Joined: Sat Jan 19, 2013 4:30 pm
Location: CA

Part out: Coupe shell, oem cup holder, EDIS coils, doors, weather stripping, ARP, Momo, Nardi

Postby ethergore2 » Thu Dec 31, 2015 10:33 am

****ALL prices OBO, text for pictures if you need more.

-Cup holder- $30
Image

-ARP flywheel bolts (set)- $20
Image

-Momo steering wheel- $100
Image
Image

-Personal (Nardi) Steering wheel- $100
Image

-Ford EDIS coils x 4- $50
-Bluetop injectors- $50
-Injector resistor- $15
-Cold start injector-$5
-20 valve TPS pigtail- $5
-Water temp sensor- Sold
Image
Image
Image

Pictures upon request:
-Shell with clean title- $500, includes doors, trunk lid, brake lines, glass, steering column, rear wire harness and remaining odds and ends. You will need a rear end, wheels and front suspension to make it a rolling chassis

-Rear wire harness- $150
-complete heater minus the climate control, includes all under dash venting- $100
-Driver and passenger door weather stripping, near perfect-$75
-Blue cloth rear seat- $100
-Blue kick panels, pair- $50

-Brake hard lines- $50 without proportioning valve
Image

-Blue coupe trunk lid- $75
Image

-Driver door, blue- $50 with glass and regulator, no locks
Image

-Passenger door, blue- $75 with glass and regulator
Image

-All glass available on car- Contact for price
Image

-Window cowl- $25 Pick up only
Image

-Front Side windshield moldings, not top-$20

-Brake shield, pair- $20
Image

-Fuel door, blue with cable- $50
Image

Aisin slave cylinder- $20
Image

-Electric fan 14" (I don't remember the brand but its not a cheap ebay fan that will stop working in a week)-$20
Image

-Blue top ECU- $30
-Crank pulley- Sold
-Power steering reservoir- Sold
-Charcoal canister- Sold
-Distributor heat shield- $10
-AC compressor bracket-Sold
-Spring insulators- Sold
-Heater valve- $10
-Starter plunger-Free with any purchase
-Engine brace- Free with any purchase
-FWD (I think) water pump housing- Free with any purchase
-Exhaust donut- Sold
Image

-Earl's oil cooler- Sold
-1 lateral bar/panhard bushing (Energy)- $5
Air vent cup holder- Free with any purchase
Image

-Fidanza lightweight flywheel (Probably needs new surface plate that can be purchased for $60)- Sold
-Act stage 3 pressure platen just buy a new disc and save money- $25
Image

Image

-Tranny crossmember- $25
Image

All parts located in Redlands CA

Call or text Andrew (909)644-6420
Last edited by ethergore2 on Mon Mar 14, 2016 11:41 am, edited 71 times in total.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


Nine-Breaker
Club4AG Regular
Posts: 44
Joined: Thu Jan 17, 2013 11:17 pm
Location: Seatac, WA

Re: Complete Part Out

Postby Nine-Breaker » Thu Dec 31, 2015 10:55 am

Wow. So much good stuff here.

Interested in both door panels and jdm rear bumper with brackets shipped to 98198

ethergore2
Club4AG Enthusiast
Posts: 137
Joined: Sat Jan 19, 2013 4:30 pm
Location: CA

Re: Complete Part Out

Postby ethergore2 » Thu Dec 31, 2015 11:35 am

Nine-Breaker wrote:Wow. So much good stuff here.

Interested in both door panels and jdm rear bumper with brackets shipped to 98198


I'll just ship at cost. Maybe Fedex or greyhound. I'm guessing 50-100 for the bumper. Just text me your offer for parts only and we can work out the rest.

Nine-Breaker
Club4AG Regular
Posts: 44
Joined: Thu Jan 17, 2013 11:17 pm
Location: Seatac, WA

Re: Complete Part Out

Postby Nine-Breaker » Thu Dec 31, 2015 4:55 pm

I just noticed the door panels are blue so I'll pass on that. But still interested in rear bumper and now coil overs

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


YatWah
Posts: 4
Joined: Wed Dec 30, 2015 11:36 pm

Re: Complete Part Out

Postby YatWah » Thu Dec 31, 2015 7:22 pm

Hello, I am interested in the pair of manual side mirrors for $100. Can you text my number 415-999-6786 the pictures of the sidemirror. What sort of payment do yo accept, I have access to paypal and venmo.

previadrifter
Club4AG Expert
Posts: 257
Joined: Sun Feb 03, 2013 2:30 pm

Re: Complete Part Out

Postby previadrifter » Thu Dec 31, 2015 10:29 pm

PMed about shift knob and maybe wheels.

Soot
Posts: 2
Joined: Sat Jan 02, 2016 8:08 am
Location: SL, UT

Re: Complete Part Out

Postby Soot » Sat Jan 02, 2016 12:52 pm

I'm interested in the ITBs, ITG filter and possibly the velocity stacks (waiting to hear back if a guy can make spacers for me). I'll shoot you a PM on Monday once I've heard back on a lead for some other engine bits I'll need.

ethergore2
Club4AG Enthusiast
Posts: 137
Joined: Sat Jan 19, 2013 4:30 pm
Location: CA

Re: Complete Part Out

Postby ethergore2 » Sat Jan 02, 2016 7:07 pm

Soot wrote:I'm interested in the ITBs, ITG filter and possibly the velocity stacks (waiting to hear back if a guy can make spacers for me). I'll shoot you a PM on Monday once I've heard back on a lead for some other engine bits I'll need.


Just let me know.

ethergore2
Club4AG Enthusiast
Posts: 137
Joined: Sat Jan 19, 2013 4:30 pm
Location: CA

Re: Complete Part Out

Postby ethergore2 » Sat Jan 02, 2016 7:08 pm

I updated my current parts list. Everything listed is available still. Those of you who are waiting for parts to come off- I am making progress and will let you know as soon as the part you want is off. Thanks

ethergore2
Club4AG Enthusiast
Posts: 137
Joined: Sat Jan 19, 2013 4:30 pm
Location: CA

Re: Complete Part Out

Postby ethergore2 » Sun Jan 03, 2016 7:57 pm

Updated some prices to try to get things moving.

ae86dipset
Club4AG Enthusiast
Posts: 99
Joined: Thu Jan 10, 2013 9:58 pm

Re: Complete Part Out

Postby ae86dipset » Mon Jan 04, 2016 12:31 am

Pmed about ecu with harness possibly itbs as well

Soot
Posts: 2
Joined: Sat Jan 02, 2016 8:08 am
Location: SL, UT

Re: Complete Part Out

Postby Soot » Mon Jan 04, 2016 6:16 am

Emailed for ITBS, filter, stacks and GE mani.

cerumo
Club4AG Enthusiast
Posts: 129
Joined: Thu Jan 10, 2013 10:14 pm

Re: Complete Part Out

Postby cerumo » Mon Jan 04, 2016 12:35 pm

Sent text about underdash harness. 626 536 0066.

quietskaterguy
Club4AG Enthusiast
Posts: 71
Joined: Mon Jan 14, 2013 9:26 pm
Location: Edmonton Alberta Canada

Re: Complete Part Out

Postby quietskaterguy » Mon Jan 04, 2016 12:58 pm

sent you a txt
Matt- 83 panda hatch

ethergore2
Club4AG Enthusiast
Posts: 137
Joined: Sat Jan 19, 2013 4:30 pm
Location: CA

Re: Complete Part Out

Postby ethergore2 » Tue Jan 05, 2016 9:49 pm

Everything is up to date.

User avatar
chohdog
Club4AG Enthusiast
Posts: 152
Joined: Thu Jan 10, 2013 10:15 pm

Re: Complete Part Out

Postby chohdog » Thu Jan 07, 2016 9:33 am

dude, so sad to see this go! You never got to enjoy the car!

Anyhow, I'd be interested in the rear calipers as well as the custom catch can. Let me know!

ethergore2
Club4AG Enthusiast
Posts: 137
Joined: Sat Jan 19, 2013 4:30 pm
Location: CA

Re: Complete Part Out

Postby ethergore2 » Thu Jan 07, 2016 12:13 pm

chohdog wrote:dude, so sad to see this go! You never got to enjoy the car!

Anyhow, I'd be interested in the rear calipers as well as the custom catch can. Let me know!


PM'd

ethergore2
Club4AG Enthusiast
Posts: 137
Joined: Sat Jan 19, 2013 4:30 pm
Location: CA

Re: Complete Part Out

Postby ethergore2 » Sat Jan 09, 2016 10:52 pm

Everything is updated. I lowered some prices too.

quietskaterguy
Club4AG Enthusiast
Posts: 71
Joined: Mon Jan 14, 2013 9:26 pm
Location: Edmonton Alberta Canada

Re: Complete Part Out

Postby quietskaterguy » Mon Jan 11, 2016 10:48 am

Just recieved the items I bought from Andrew.
Great seller to deal with.
Everything was packaged very well.
Great communication
BUMP for a great guy, with great items, at great prices!
Matt- 83 panda hatch

ethergore2
Club4AG Enthusiast
Posts: 137
Joined: Sat Jan 19, 2013 4:30 pm
Location: CA

Re: Complete Part Out

Postby ethergore2 » Tue Jan 12, 2016 2:32 pm

All parts updated. I removed all the sold stuff to make it easier. Just text me for pictures of anything you want.

previadrifter
Club4AG Expert
Posts: 257
Joined: Sun Feb 03, 2013 2:30 pm

Re: Complete Part Out

Postby previadrifter » Thu Jan 14, 2016 5:30 pm

Buy with confidence. Got my stuff and it is awesome. Good guy who worked with me and I appreciate it.

starlet4ag
Club4AG Regular
Posts: 33
Joined: Sun Aug 18, 2013 6:51 pm

Re: Complete Part Out

Postby starlet4ag » Thu Jan 21, 2016 7:16 pm

Thanks for all the parts bump for a legit seller

patobo
Posts: 2
Joined: Fri Jul 24, 2015 7:58 am

Re: Complete Part Out

Postby patobo » Fri Jan 22, 2016 3:31 pm

do you have the climate control assembly and a good working headlight switch?

ethergore2
Club4AG Enthusiast
Posts: 137
Joined: Sat Jan 19, 2013 4:30 pm
Location: CA

Re: Complete Part Out

Postby ethergore2 » Sun Jan 24, 2016 11:15 am

patobo wrote:do you have the climate control assembly and a good working headlight switch?


Sorry. No longer available.

ethergore2
Club4AG Enthusiast
Posts: 137
Joined: Sat Jan 19, 2013 4:30 pm
Location: CA

Re: ITB adapter, 1 piece drive shaft, EDIS coils, misc

Postby ethergore2 » Mon Feb 01, 2016 2:08 pm

More parts added

ethergore2
Club4AG Enthusiast
Posts: 137
Joined: Sat Jan 19, 2013 4:30 pm
Location: CA

Re: Complete Part Out

Postby ethergore2 » Mon Feb 01, 2016 2:09 pm

patobo wrote:do you have the climate control assembly and a good working headlight switch?


The buyer backed out so I do have this available. Text me.

ethergore2
Club4AG Enthusiast
Posts: 137
Joined: Sat Jan 19, 2013 4:30 pm
Location: CA

Re: Part out: ITB adapter, 1 piece drive shaft, complete interior, more

Postby ethergore2 » Sun Feb 07, 2016 7:55 am

List updated. Thanks for looking.

Sctjaramillo
Club4AG Regular
Posts: 33
Joined: Thu Jul 23, 2015 3:06 pm

Re: Part out: ITB adapter, 1 piece drive shaft, complete interior, more

Postby Sctjaramillo » Sun Feb 07, 2016 11:57 am

I'm interested in the Aisin slave if it comes with the line as well ?

ethergore2
Club4AG Enthusiast
Posts: 137
Joined: Sat Jan 19, 2013 4:30 pm
Location: CA

Re: Part out: ITB adapter, 1 piece drive shaft, complete interior, more

Postby ethergore2 » Mon Feb 08, 2016 1:17 pm

Sctjaramillo wrote:I'm interested in the Aisin slave if it comes with the line as well ?


It does. Send me a text.

ethergore2
Club4AG Enthusiast
Posts: 137
Joined: Sat Jan 19, 2013 4:30 pm
Location: CA

Re: Part out: ITB adapter, coupe shell, GTS tank, doors, more

Postby ethergore2 » Sat Feb 13, 2016 4:55 pm

Parts updated

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “4A-GE Engine Parts”

Who is online

Users browsing this forum: No registered users and 3 guests