4age 16v + Tranny

evans
Club4AG Regular
Posts: 19
Joined: Wed Jan 23, 2013 11:40 am

4age 16v + Tranny

Postby evans » Sun Feb 03, 2013 10:39 am

I have a 16v with transmission that was pulled from my 1986 Corolla GTS. My plans for the car have changed and i will no longer be needing the motor. when it was pulled it was running BUT the head gasket was blown. It will need at minimum new gaskets all around. That being said I am looking to sell it as is or part it out.
[img]<a%20href="http://www.flickr.com/photos/90817286@N04/8248879516/"%20title="Untitled%20by%20evans808,%20on%20Flickr"><img%20src="http://farm9.staticflickr.com/8203/8248879516_d0864e6be5.jpg"%20width="500"%20height="375"%20alt="Untitled"></a>[/img]
This is a picture of it while it was still in the car. There is some kind of spacer between the intake manifold and the block. says T3 on it. doesn't look stock and it may be of value to those who know what it is.
all components are best offer. I will ship anywhere at buyers expense.
I also have bran new Pistons with connecting rods
a turbo from an SR20 (nissan 240sx)
and a ACT 6 puck clutch and pressure plate for sale.
Again everything is BEST OFFER
Located: Kelowna BC Canada.

evans
Club4AG Regular
Posts: 19
Joined: Wed Jan 23, 2013 11:40 am

Re: 4age 16v + Tranny

Postby evans » Tue Feb 05, 2013 6:28 am

No one needs any parts from a complete 4age?
bump...

runkillerrabbit
Club4AG Enthusiast
Posts: 147
Joined: Mon Jan 14, 2013 9:39 pm

Re: 4age 16v + Tranny

Postby runkillerrabbit » Thu Feb 07, 2013 4:27 pm

i need both alternator brackets bottom and top. lmk shipped to 92887 lmk
FIDM fashion design
ITT tech electrical engineer
FJC Fullerton automotive program




R2D2 build log

EASTSIDESD
Club4AG Enthusiast
Posts: 57
Joined: Wed Feb 06, 2013 6:07 pm

Re: 4age 16v + Tranny

Postby EASTSIDESD » Fri Feb 08, 2013 10:16 am

how much shipped to san diego ca? the whole thing

kfed
Posts: 3
Joined: Fri Jan 11, 2013 8:21 pm
Contact:

Re: 4age 16v + Tranny

Postby kfed » Fri Feb 08, 2013 12:44 pm

Image

evans
Club4AG Regular
Posts: 19
Joined: Wed Jan 23, 2013 11:40 am

Re: 4age 16v + Tranny

Postby evans » Sun Feb 10, 2013 6:17 am

i will be able to answer both your questions tomorrow. thanks for the interest.

AllyKat
Posts: 6
Joined: Fri Feb 15, 2013 11:41 am
Location: Phoenix, AZ

Re: 4age 16v + Tranny

Postby AllyKat » Fri Feb 15, 2013 11:48 am

If it's still available, how much for the engine shipped to 85286?

Snappatudel
Club4AG Regular
Posts: 26
Joined: Mon Feb 11, 2013 5:52 pm

Re: 4age 16v + Tranny

Postby Snappatudel » Fri Feb 15, 2013 3:41 pm

hey man I would totally take the intake manifold with everything on it, and the coolant lines, and water necks both front and rear. basically the whole cooling system of the engine, please!!!

pm me.

toyotoddler91
Posts: 9
Joined: Thu Feb 07, 2013 11:17 pm

Re: 4age 16v + Tranny

Postby toyotoddler91 » Sat Feb 16, 2013 7:23 pm

interested in the transmission
pm me

builtnotbought
Club4AG Enthusiast
Posts: 149
Joined: Sat Jan 12, 2013 2:23 pm

Re: 4age 16v + Tranny

Postby builtnotbought » Wed Feb 20, 2013 11:32 pm

is the motor a redtop or bluetop

User avatar
FUNKMACH1NE
Club4AG Enthusiast
Posts: 114
Joined: Sat Jan 12, 2013 2:38 pm
Location: Los Angeles

Re: 4age 16v + Tranny

Postby FUNKMACH1NE » Thu Feb 21, 2013 7:35 am

I think your engine is a Hi-Comp Red Top. That's the only reason why it would have that T3 Big Port/Small Port adapter. Just a heads up.

evans
Club4AG Regular
Posts: 19
Joined: Wed Jan 23, 2013 11:40 am

Re: 4age 16v + Tranny

Postby evans » Thu Feb 21, 2013 11:55 am

unfortunately i do not know. the valve covers are painted over and my knowledge on this motor is limited. is there something else i can look for that will help you find your answer?

dennis_4age_13
Club4AG Regular
Posts: 15
Joined: Tue Mar 05, 2013 9:10 am

Re: 4age 16v + Tranny

Postby dennis_4age_13 » Tue Mar 05, 2013 9:37 am

Intrested in tranny and dizzy

dennis_4age_13
Club4AG Regular
Posts: 15
Joined: Tue Mar 05, 2013 9:10 am

Re: 4age 16v + Tranny

Postby dennis_4age_13 » Wed Mar 06, 2013 10:08 am

How much we talking dizzy tranny and act clucht/pressure plate?

dennis_4age_13
Club4AG Regular
Posts: 15
Joined: Tue Mar 05, 2013 9:10 am

Re: 4age 16v + Tranny

Postby dennis_4age_13 » Fri Mar 08, 2013 2:07 pm

Intrested in tranny ,headers ,and maf... pm me?

FidelityBassist
Club4AG Regular
Posts: 32
Joined: Thu Jan 10, 2013 10:49 pm
Location: Glendale, CA

Re: 4age 16v + Tranny

Postby FidelityBassist » Sun Mar 10, 2013 12:43 pm

its got the tvis manifold so id assume bluetop. cant tell whether its a 7rib or 3rib block

FidelityBassist
Club4AG Regular
Posts: 32
Joined: Thu Jan 10, 2013 10:49 pm
Location: Glendale, CA

Re: 4age 16v + Tranny

Postby FidelityBassist » Sun Mar 10, 2013 12:46 pm

if you want to make sure, you can look near the back passenger side of the engine, if there is a hose running vertically from the block into the head it is usually a sign that its a hicomp block.

BadPanda
Club4AG Regular
Posts: 14
Joined: Sun Apr 14, 2013 10:06 am
Location: Danville, Va. 24540

Re: 4age 16v + Tranny

Postby BadPanda » Thu Sep 05, 2013 12:38 pm

Still got this engine? text me please 208-549-7676