CNC machined intake runners for 16v small port 4age

Carnut
Posts: 6
Joined: Wed Jul 29, 2015 3:16 am

CNC machined intake runners for 16v small port 4age

Postby Carnut » Wed Jul 29, 2015 3:31 am

CNC machined intake for 16v small port 4age- just add your choice of plenum and weld together

This intake was designed and made because i was unable to locate a well designed intake for a small-port 4age that flowed well

This intake is my spare as I had 2 made, the original is on my KP Starlet race car, it flows way better than a factory plenum off an AE86,

With a RWD from and AE86 I was making 217kw at the rear wheels on 16pis - This plenum increased the the power to 243kw at 16psi and makes 217kw at 13psi.

Reason it is for sale is I have no requirement for a spare plenum and it has been gathering dust on the shelf

check out trade me for photo's http://www.trademe.co.nz/Browse/Listing ... =923324263

If you are wanting more photo's please let me know your email address and I will email you

Happy to post anywhere in the world at buy cost - price is $500 NZD plus postage

Any questions please let me know

Respeckmejulie
Club4AG Regular
Posts: 15
Joined: Fri Sep 13, 2013 5:53 pm
Location: Seattle

Re: CNC machined intake runners for 16v small port 4age

Postby Respeckmejulie » Wed Jul 29, 2015 4:44 pm

that is gorgeous!
My toyota collection: ''82 KP61, '87 AW11

Carnut
Posts: 6
Joined: Wed Jul 29, 2015 3:16 am

Re: CNC machined intake runners for 16v small port 4age

Postby Carnut » Sun Aug 02, 2015 2:21 am

Thank you,

it also helps the 4ag breath well and go hard

uon1
Posts: 7
Joined: Mon Jan 14, 2013 10:38 pm

Re: CNC machined intake runners for 16v small port 4age

Postby uon1 » Sat Aug 22, 2015 10:23 pm

Can you make more plenums?, if so, how much?, thanks

Carnut
Posts: 6
Joined: Wed Jul 29, 2015 3:16 am

Re: CNC machined intake runners for 16v small port 4age

Postby Carnut » Tue Aug 25, 2015 9:28 pm

I only made 2 these and only have one for sale

I am currently working on a version 2 and I am more than happy to make a number of these if required

The new plenums are being machined out of one solid block of alloy and for a complete plenum that you just bolt on the car it will cost about $2500 NZD.

For the the runners machined out of a solid block it is $1050 NZD Dollars, you make your own plenum cover

The reason for me making second version is I am learning the CAD system and wanted the challenge to see if I could make one out of a solid block of Alloy and also improve the airflow, H/P on my turbo charged 4age

I will post photo's later tonight of the second version

Thanks for your enquiry

Carnut
Posts: 6
Joined: Wed Jul 29, 2015 3:16 am

Re: CNC machined intake runners for 16v small port 4age

Postby Carnut » Wed Aug 26, 2015 1:59 am

Pictures of the second version of plenum for a KP starlet that is running a 4agte
Attachments
MANIFOLD.jpg
CAD design of 4age runners to be made from block of Alloy - Will be used to run CNC machine - (Can make this for $1050 NZD)
4age plenum v2.jpg
Version 2 of the CNC machined runners for a 16v small port 4age
4age plenum v2.jpg (68.58 KiB) Viewed 6776 times
plenium.jpg
Completed plenum for a 16v small port 4age - this is for a RWD KP61 Starlet
To complete this it costs $2500 NZD
plenium.jpg (78.75 KiB) Viewed 6776 times

Carnut
Posts: 6
Joined: Wed Jul 29, 2015 3:16 am

Re: CNC machined intake runners for 16v small port 4age

Postby Carnut » Wed Aug 26, 2015 2:03 am

These plenum runners are my first version as a few years ago I was unable to find any nice intake for a small port 4age

This version of 4age runners is for sale for $500 NZD

I am happy to post overseas

If you have any question please email me
Attachments
4age plenium V1.jpg
For sale for $500 NZD
4age plenium V1.jpg (75.15 KiB) Viewed 6776 times

Eightysixer23
Club4AG Expert
Posts: 243
Joined: Fri Jan 11, 2013 12:46 pm
Location: G-town

Re: CNC machined intake runners for 16v small port 4age

Postby Eightysixer23 » Mon Feb 01, 2016 9:34 pm

Is this available?